As soon as unofficial KitKat builds started to surface, it became evident that the KitKat needs a special recovery as it was creating nuisance with the recoveries we had. TWRP being incompatible with KitKat ROMs like CyanogenMod 11, ParanoidAndroid, SlimKat, etc.
ClockworkMod rolled out an update for Sprint variant of HTC One which is fully functional with KitKat ROMs as well as having backward compatibility.
At the time of writing, the latest version of CWM for Sprint HTC One is 126.96.36.199.
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be M7_WLS!
This procedure is not for other variants of HTC One like that at T-Mobile, AT&T, Sprint, etc. including international edition.
Do not use the procedures discussed here on any device of HTC or any other company. You have been warned!
BEFORE YOU BEGIN..
You must do this pre-installation stuff before attempting to install CWM recovery on your Sprint HTC One in order to avoid any complications later, and have a smooth and successful process.
BACK UP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
INSTALL HTC ONE DRIVER
You must have proper and working driver installed on your windows computer to be able to successfully install a firmware on your Sprint HTC One. In case you’re not sure, follow the link below for a definitive guide for installing driver for your HTC One on your computer.
CHARGE YOUR DEVICE
If your android device powers off due to lack of battery while the process is underway, it could damage the device.
So, make sure your device is adequately charged — at least 50% battery of the device.
GUIDE: HTC ONE M7_WLS CWM RECOVERY
Download the either of the Installer file, for Touch edition and Non-touch edition of CWM recovery for your HTC One.
- You need to unlock bootloader of your HTC One first to be able to install CWM recovery. Since unlocking bootloader would completely wipe (delete everything) on your HTC One, be sure to backup your phone adequately before attempting to unlock bootloader and install custom recovery. Link – HTC ONE BOOTLOADER UNLOCKING GUIDE.
- Prepare your phone:
- Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.
- Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section).
- Connect your phone to PC with a USB cable and if a pop-up screen shows up on Phone asking you to Allow USB debugging for the computer, make sure you tick the checkbox and tap OK.
- Extract the installer file (using 7-zip, preferably). For touch edition, it’s htc-one-m7wls-touch-cwm-recovery-installer.zip. And for Non-touch edition it’s htc-one-m7wls-cwm-recovery-installer.zip . You’ll get the following files, and one folder:
- api (folder)
- recovery-clockwork-touch-188.8.131.52-m7spr.img (or) recovery-clockwork-184.108.40.206-m7spr.img.
- Double-click/Run the 1-click-cwm-recovery-installer.bat’ file and follow the simple on-screen instructions like ‘Press any key to continue..’ to install CWM recovery on your HTC One.
- Once the CWM recovery is flashed successfully on your HTC One M7_WLS, your device will reboot automatically.
└ Note: In case the script gets stuck on < waiting for device > (see image below) for more than a minute or so, then it means you don’t have proper drivers installed on your computer for your HTC One. Follow the drivers installation guide provided above in ‘Before you begin..‘ section for troubleshooting driver and other connectivity issues.
- Boot into recovery mode. For this:
- Power off your device and wait 4-5 seconds after lights go off
- Press and hold Volume Down button then press the Power button to switch on your phone and release it, but keep holding the Volume Down button.
- Your phone will boot into Bootloader mode You’ll see a screen with options to boot into fastboot and recovery mode. Here, press Volume down once to navigate to RECOVERY, then press Power button to select it and boot into Recovery mode.
└ In Bootloader and Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.
If you need any help with the guide above, let us know in comments below. We’d be happy to help!
Your suggestions are most welcomed!