[How To] Update T-Mobile Galaxy NOTE 2 T889 to Android 4.4 KitKat with OmniROM

Page content:

CUSTOM ROM INFO
Name OmniROM
Android Update Android 4.4, KitKat (Launched in Nov 13 by Google)
Is this official? No. Official update from Samsung is expected to release in Feb-March 2014
Stability Good enough for daily use
Credits UtkarshGupta

Let’s see how to install the Android 4.4 KitKat on your T-Mobile Galaxy NOTE 2 SGH-T889.

WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SGH-T889!

Do not use the procedures discussed here on any other Galaxy NOTE 2 (including the NOTE 2 devices at Sprint, Verizon, AT&T and the international ones) or any other device of Samsung or any other company. You have been warned!

BEFORE YOU BEGIN..

You must do this pre-installation stuff before attempting to install the ROM on your T-Mobile Galaxy NOTE 2 in order to avoid any complications later, and have a smooth and successful process.

BACK UP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

CHARGE YOUR DEVICE

If your android device powers off due to lack of battery while the process is underway, it could damage the device.

So, make sure your device is adequately charged — at least 50% battery of the device.

EXAMPLE VIDEO

If you haven’t used a custom recovery, either CWM or TWRP, before, to install a .zip file of a ROM on anything else, then we suggest you first watch a video of that, given right below, to get familiar with the process.

Just fyi, the video below shows installing a .zip file (of recovery) on Galaxy NOTE 2, but it doesn’t matter as the process remains exactly same. So, once you are finished with video, jump to downloads and step-by-step guide below.

T-MOBILE GALAXY NOTE 2 T889 ANDROID 4.4 KITKAT ROM

DOWNLOADS

Download the files given below and transfer them to a separate folder on your phone and remember the location.

GAPPS FILE

Download Link | File name: pa_gapps-full-4.4-20131119-signed.zip (257 MB)

SUPER SU

Download Link | File name: UPDATE-SuperSU-v1.75.zip (1.10 MB)

ROM FILE

Download Link (Mirror) | File name: omni-4.4-20131117-t0ltetmo-HOMEMADE.zip (166 MB)

For latest version of the ROM, check the original page →.

Reminder: Before you proceed, make sure you’ve transferred the files you downloaded above to a separate folder on your T-Mobile Galaxy NOTE 2 SGH-T889.

STEP-BY-STEP GUIDE

Make sure you have backed up your phone adequately (including important data stored on internal memory).

NOTE:

Older versions of both CWM and TWRP recoveries are not working with Android 4.4 based ROMs, throwing installation errors and WiFi bugs, therefore you need to use the latest version of either recovery. We believe TWRP v2.6.3.0 and above, and CWM v6.0.4.3 and above are working fine with Android 4.4 ROMs.

GUIDE FOR CWM RECOVERY USERS
  1. Boot into recovery mode. For this:
    • Power off your device and wait for 5-10 seconds until the device is fully switched off.
    • Press and hold  Volume Up + Home + Power buttons together and release them as soon as you see the Galaxy NOTE 2 logo.
      └ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.
  2. Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore » Backup.
  3. Perform a Factory Reset (This will delete all apps and their settings and game progress). For this:
    • Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot)
  4. Also perform a System Format, Go to ‘Mounts and storage‘, select ‘format /system‘, then select Yes on the next screen to confirm system format
  5. First Install the ROM file:
    • Select Install zip » Choose zip from sdcard (or external sdcard, you know where your files are) » browse to the location where you saved the file and select the ROM file
      How to Flash File in CWM Recovery
  6. Now similarly flash the Gapps and Super SU files
    └ Make sure to first flash the ROM, then Gapps and then Super SU file.
  7. Reboot your device. For this, go back to the main menu of recovery and select reboot system now.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

GUIDE FOR TWRP RECOVERY USERS
  1. Boot into recovery mode. For this:
    • Power off your device and wait for 5-10 seconds until the device is fully switched off.
    • Press and hold  Volume Up + Home + Power buttons together and release them as soon as you see the Galaxy NOTE 2 logo.
      └ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.
  2. Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup » and select all check boxes and swipe on the Swipe to confirm option at the bottom of the screen to confirm backup.
  3. Perform a Factory Reset (this will delete all apps and their settings and game progress). For this:
    • Tap on Wipe » then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option (screenshot)
  4. Also perform a ‘System format‘. For this:
    • Tap on Wipe » tap Advanced Wipe » tap System to select it » then at the bottom of the screen do a Swipe on the ‘Swipe to wipe‘ option
  5. First Install the ROM file:
    • Tap on Install » browse to the location where you saved the files and tap on the ROM file. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
      How to Flash File in CWM Recovery
  6. Now similarly flash the Gapps and Super SU files
    └ Make sure to first flash the ROM, then Gapps and then Super SU file.
  7. Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

FIXES

If you’re having issues with Photosphere, download this quick fix and flash it using recovery in the same way you flashed the other zip files in the guide above.

FEEDBACK US!

It was easy to install Android 4.4 KitKat, right? Let us know how it tastes to you.

Your suggestions and queries, if any, are most welcomed!

4 Comment

  1. frank says: Reply

    Thanks its great but the only thing is the im in 3g only and I get a h sometimes the internet is slow. Please help

  2. gamal ads says: Reply

    i install kitkat on my galaxy sgh-t889 and with twrp recovery but when i finish i discovered that the network not active and i can’t make a call

  3. joan says: Reply

    THIS DOES NOT WORK ON THE GALAXY NOTE 2 SGH-T889, INSTALL THE RED BUT NOT RECOGNIZE THE CEL, PLEASE ANY SOLUTION?

    1. Dallan Baker says: Reply

      Use cwm not twrp

Leave a Reply