Latest ClockworkMod (CWM) Recovery for International Galaxy S3 GT-I9300 (Android 4.4 Compatible!)

Even though Samsung Galaxy S3 is one gen older device, it is still kicking in development aspect.

Like all of your favorite development teams, ClockworkMod recovery team is also still supporting the Galaxy S3 and has recently pushed out an update to recovery which promises to fix the recovery in-compatibility issue of KitKat ROMs.

So, you shouldn’t get the pesky ‘set metadata recursive’ error with this version of recovery.

All Android 4.4 ROMs like CyanogenMod 11, SlimKat, etc will function perfectly with this  latest version. CWM beats TWRP in this aspect.

We here have the 6.0.4.4 version of CWM for Samsung Galaxy S3 GT-I9300.

WARNING!

Warranty may be void of your device if you follow the procedures given on this page!

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be GT-I9300!

Please know that this page is meant only for Samsung Galaxy S3, model no. GT-I9300. Please DO NOT try the procedures given here on other variants of the Galaxy S3: SGH-I9305, or the S3 sets at Verizon, T-Mobile, Sprint, AT&T and others who have different model no.

BEFORE YOU BEGIN..

You must do this pre-installation stuff before attempting to install CWM on your Galaxy S3 GT-I9300 in order to avoid any complications later, and have a smooth and successful process.

BACK UP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on sd card, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

 ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

INSTALL GALAXY S3 DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash CWM on your Samsung Galaxy S3. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy S3 on your computer.

 SAMSUNG Galaxy S3 DRIVERS INSTALLATION GUIDE

CHARGE YOUR DEVICES

If your android device, or PC, powers off due to lack of battery while the process is underway, it could damage the device. So, make sure both of them are adequately charged and that no power interruption takes place when the process is undergoing — at least 50% battery of the device and laptop is what we would recommend.

OTHER THINGS TO TAKE CARE OF:

└ Use original USB cable to connect your phone to PC.

└ Do not use the procedures given below on Mac (using VMWare) as it works best on proper Windows PC only.

EXAMPLE VIDEO

If you haven’t used Odin software to install a recovery on a Samsung galaxy device before, we suggest you first watch a video of that, given right below, to get familiar with the process.

Btw, the video below shows installation of the different version of CWM recovery on Samsung Galaxy S3, but as the process is exactly same, it doesn’t matter.

https://http://www.youtube.com/watch?v=ioqGyctTW3g

GUIDE: SAMSUNG GALAXY S3 CWM RECOVERY

DOWNLOADS

Download the files given below and save them in a separate folder on your computer (just to keep things tidy, that is).

International Galaxy S3 CWM (Touch) with Odin: DOWNLOAD LINK
File name: samsung-galaxy-s3-i9300-touch-cwm-odin.zip (7.6MB)

International Galaxy S3 CWM (Non-touch) with Odin: DOWNLOAD LINK
File name: samsung-galaxy-s3-i9300-cwm-odin.zip (7.6 MB)

STEP-BY-STEP GUIDE

Once you’ve finished downloading the file given in downloads section above, follow the instructions below for installing CWM on your International Galaxy S3.

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after installing the CWM, which might delete internal sd card too, your files will remain safe on PC.

  1. Extract/Unzip the CWM file on your computer (using 7-zip free software, preferably). For touch, it is samsung-galaxy-s3-i9300-touch-cwm-odin.zip and for non-touch, it is samsung-galaxy-s3-i9300-cwm-odin.zip. You’ll get the following files:
    • Odin3 v3.09.exe
    • Odin3.ini
    • recovery-clockwork-touch-6.0.4.4-i9300.tar (or) recovery-clockwork-6.0.4.4-i9300.tar
  2. Disconnect the Galaxy S3 from PC if it is connected.
  3. Double-click the Odin3 v3.09.exe file to open Odin.
  4. Boot your International Galaxy S3 into Download Mode:
    1. Power off your phone first and wait for 6-7 seconds after display is off.
    2. Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home. (The image below of the Galaxy S4 applies to S3, too!)
    3. Press Volume Up now to continue to Download Mode.
      Smasung Galaxy S4 Download Mode
  5. Connect Galaxy S3 to PC. Odin window will show an Added!! message in bottom left box.
    Odin’s screen would look like this:
    Odin Device Added Message
    If you don’t get the Added! message, here are some troubleshooting tips:
    • Make sure you have installed driver for Galaxy S3 as said above in ‘Before you begin..’ section.
    • If you have already installed driver, then uninstall them and reinstall back.
    • Connect using a different USB port on your PC.
    • Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
    • Reboot phone and PC and then try again.
  6. Load the recovery file (extracted in Step 1) into Odin as instructed below:
    • Click on the PDA button on Odin and select the recovery-clockwork-touch-6.0.4.4-i9300.tar (or) recovery-clockwork-6.0.4.4-i9300.tar (from step 1).
      Your Odin window should look like the screenshot below:
      Galaxy S3 I9300 Touch CWM Recovery
  7. Click the Start button to begin flashing CWM on your Galaxy S3 GT-I9300, and wait until you see a RESET! message in Odin’s top left box.
  8. When you get RESET! message, your phone will restart automatically. You can then disconnect your phone from PC.
    Odin PASS aka Reset

If you see FAIL message instead of the RESET in Odin’s top left box, that a problem. Try this now: disconnect your Galaxy S3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy S3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

That’s all. If you need help regarding this, feel free to ask us in comments below.

Feedback Us!

It was easy, right? Let us know what you plan to do now, with latest cwm recovery installed. Looking to install Android 4.4 KitKat maybe, eh?

Suggestions are most welcomed!

38 Comments

  1. Thanks a lot ! You are great ! Now I have the latest version of ClockworkMod 😀

  2. Thanks a lot ! You are great ! Now I have the latest version of ClockworkMod 😀

  3. Thanks a lot ! You are great ! Now I have the latest version of ClockworkMod 😀

  4. Thanks guys for making it easy (after I made it very hard for myself). This worked perfectly. cheers!

  5. Thanks guys for making it easy (after I made it very hard for myself). This worked perfectly. cheers!

  6. Thanks guys for making it easy (after I made it very hard for myself). This worked perfectly. cheers!

  7. great work people… worked like charm

  8. great work people… worked like charm

  9. great work people… worked like charm

  10. Thanks a lot man. Massive help!

  11. Thanks a lot man. Massive help!

  12. Thanks a lot man. Massive help!

  13. Thanks mate.

  14. Thanks mate.

  15. neat! now ist time to install cm11

  16. neat! now ist time to install cm11

  17. neat! now ist time to install cm11

  18. Firs time i tried to install that Odin got stuck at
    ” Get PIT for mapping..” and failed.

    All the other times it seems to install correctly but very fast (odin shows 3sec), and it really isn’t in my phone. When I open recovery mode seems like I still have original.

  19. If I go to download mode, phone show that everything is custom. But whet Odin restarts phone CWM does not install itself. :/

    1. you should root your phone 😐

  20. Firs time i tried to install that Odin got stuck at
    ” Get PIT for mapping..” and failed.

    All the other times it seems to install correctly but very fast (odin shows 3sec), and it really isn’t in my phone. When I open recovery mode seems like I still have original.

  21. Firs time i tried to install that Odin got stuck at
    ” Get PIT for mapping..” and failed.

    All the other times it seems to install correctly but very fast (odin shows 3sec), and it really isn’t in my phone. When I open recovery mode seems like I still have original.

  22. If I go to download mode, phone show that everything is custom. But whet Odin restarts phone CWM does not install itself. :/

    1. you should root your phone 😐

  23. If I go to download mode, phone show that everything is custom. But whet Odin restarts phone CWM does not install itself. :/

    1. you should root your phone 😐

  24. i will now try this touch cwm recovery above. i already have android 4.4 cm11 unofficial temasek installed and at the moment i use philz_touch_6.25.0-i9300. but I found out that this version of philz recovery (which is even newer , as the one you offer for download) is not 100% compatible with android 4.4. The problem is namely this: Everything works fine except for the “install zip from sd card” function. . all Zip files I flash are showing the message: “please update to the latest binary” and thus the updates do not work properly! no i will try touch cwm although i love philz cwm… 🙁

  25. i will now try this touch cwm recovery above. i already have android 4.4 cm11 unofficial temasek installed and at the moment i use philz_touch_6.25.0-i9300. but I found out that this version of philz recovery (which is even newer , as the one you offer for download) is not 100% compatible with android 4.4. The problem is namely this: Everything works fine except for the “install zip from sd card” function. . all Zip files I flash are showing the message: “please update to the latest binary” and thus the updates do not work properly! no i will try touch cwm although i love philz cwm… 🙁

  26. i will now try this touch cwm recovery above. i already have android 4.4 cm11 unofficial temasek installed and at the moment i use philz_touch_6.25.0-i9300. but I found out that this version of philz recovery (which is even newer , as the one you offer for download) is not 100% compatible with android 4.4. The problem is namely this: Everything works fine except for the “install zip from sd card” function. . all Zip files I flash are showing the message: “please update to the latest binary” and thus the updates do not work properly! no i will try touch cwm although i love philz cwm… 🙁

  27. can i flash this cmw having stock rom 4.3

    1. Yes, definitely.

  28. can i flash this cmw having stock rom 4.3

  29. can i flash this cmw having stock rom 4.3

  30. Download link is broken. The files are not at the link. Please share a link for the files again.

  31. Download link is broken. The files are not at the link. Please share a link for the files again.

Comments are closed.