Restore Samsung Galaxy Tab 2 7.0 inch Back to Stock Android 4.0 Ice Cream Sandwich with Official Samsung Firmware P3100DDBLH3

GTab2-10.1-7.0

Samsung Galaxy Tab 2 7.0 gets a fresh official stock ROM. If you have flashed some other ROM on your device as the flash addicts we all are here at The Android Soul and are wondering how to get back to that same stock ROM which came with your beautiful Tab, here is the how to guide. This firmware is especially for India but will work with any international Samsung Galaxy Tab 2 7.0 device.

Read on to find out how you can flash the P3100DDBLH3 firmware on your Galaxy Tab to restore it to stock firmware.

Compatibility

This hack and the guide below are compatible only and only with Samsung Galaxy Tab 2 7.0, model number P3100. It’s not compatible with any other device. Check your device’s model number in: Settings » About tablet.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.

How To Install DDBLH3 Android 4.0 Firmware on Galaxy Tab 2 7.0 P3100

  1. Backup your apps and important data — bookmarks, contacts, SMS, APNs (internet settings), etc. This Android backup guide would help you. Be sure to make a backupso that if anything goes wrong with the flash, you can restore your data. Your SD card files will remain intact though, so no need to backup those.
  2. It’s important you’ve the proper drivers for the tablet installed. If you have installed Samsung’s Kies software, and have connected your tablet atleast once with Kies, you already have the drivers. If not, then download and install Kies and connect your device at least once then disconnect and reboot your device and PC.
    Download Kies
  3. Download the DDBLH3  firmware.
    Download Link  |  Alternate Link
    Filename:  P3100DDBLH3_P3100ODDBLH1_INU.zip | 758.8 MB
  4. Extract the downloaded zip file once to get a file named P3100DDBLH3_P3100ODDBLH1_INU_HOME.tar.md5 (you might see the file name end with .tar instead of .md5 as the file extension is usually hidden, so it’s normal).
  5. Download Odin, which will be used to flash the firmware on your tablet.
    Download Odin3 v3.04   |  Filename: Odin3_v3.04.zip
  6. Extract the contents of the Odin3_v3.04.zip file to a folder on your computer.
  7. Disconnect your Tablet if it’s connected to PC, then switch it off.
  8. Now, put the Galaxy Tablet 2 7.0 in Download Mode — press and hold these keys together: Volume Up + Power (the volume up key is the volume key on the right).
    A Warning! screen will come up; press Volume Up key to continue to enter Download Mode.
  9. Open Odin by double-clicking on the Odin3 v3.04.exe file obtained in step 6 after extracting Odin3_v3.04.zip.
  10. Connect your tablet to PC now. You should get the message “Added!” under Odin’s message box in the bottom left.If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed (check step 2). Also, uninstall Kies from the Control Panel as well (this will leave the drivers on the computer but remove Kies which can interfere with the procedure).
  11. In ODIN, Click on PDA and select P3100DDBLH3_P3100ODDBLH1_INU_HOME.tar.md5 (from step 4).
  12. Important! Do not make any other changes in Odin except selecting the required files as given in step 11. Leave all other options as they are. Make sure Re-partition option is not selected and is unchecked.
  13. Now, hit the START button to start flashing the firmware. When the flashing is complete, your tablet will automatically reboot — and when you see the Samsung logo, you can safely unplug the cable. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin.
    What to do if Odin gets stuck: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, disconnect the tablet from the PC, close ODIN, then press and hold Volume Up + Power keys till the device reboots and shows the Warning! screen. Here, press Volume Up key to continue to enter Download Mode, then repeat the procedure again from Step 9.
  14. [Important] After you get the PASS message and the tablet reboots, it might get stuck at the booting animation. If that happens, perform the following steps to make it boot. Remember that these steps will wipe your personal data like contacts, apps, messages, etc. If your tablet has already booted, skip these steps, your tablet has been updated successfully:
    1. Boot to recovery mode — for which, press and hold Volume Down + Power keys (Volume Down button is the one next to the power button i.e the left volume key) together till the tablet reboots, then let go of the power button but keep holding down the Volume Down button for a few more seconds to boot into recovery. Once you are in recovery mode, use volume keys to move the selection up and down and power key to select the option.
    2. Go to Wipe data/Factory Reset and select it. Select Yes on next screen.
    3. Then, select reboot system now to reboot the tablet, which will now boot properly.
  15. If you run into any roadblocks while flashing the firmware, let us know and we’ll help you out.

The Android 4.0 DDBLH3 firmware is now running on your GalaxyTab. Let us know how it works for you, in the comments below.

via XDA.

45 Comments

  1. In ODIN, its failing at setup connection message, please guide on further troubleshooting. Currently I am running CM9 nightly ROM on my samsung tab 2 P3100

  2. In ODIN, its failing at setup connection message, please guide on further troubleshooting. Currently I am running CM9 nightly ROM on my samsung tab 2 P3100

  3. In ODIN, its failing at setup connection message, please guide on further troubleshooting. Currently I am running CM9 nightly ROM on my samsung tab 2 P3100

  4. hi i tried to install the firmware update first before the jelly bean rom but the firmware installation failed all the time i have tried to install it trough Odin as u suggest us to do so is there any other way or any tips you guys have to help me find a solution to that please ?

  5. hi i tried to install the firmware update first before the jelly bean rom but the firmware installation failed all the time i have tried to install it trough Odin as u suggest us to do so is there any other way or any tips you guys have to help me find a solution to that please ?

  6. hi i tried to install the firmware update first before the jelly bean rom but the firmware installation failed all the time i have tried to install it trough Odin as u suggest us to do so is there any other way or any tips you guys have to help me find a solution to that please ?

  7. this soft have a modem 3g ?

  8. this soft have a modem 3g ?

  9. this soft have a modem 3g ?

  10. Perfect guide every single word important, and thank you very much for putting so much effort to explain in detail so everyone can understand. i like that

  11. i done everything but i stuck at samsung booting text….. i done fully 14 Step 1..2…3 but still stuck.. 🙁

  12. Nooo…nooo Its done now… it take time after “Wipe data/Factory Reset” but its start now.. so thank you very much… Can you please make tutorial for Metro Ui for Samsung Galaxy Tab 2 p3100 please… your instruction is very clear

  13. Perfect guide every single word important, and thank you very much for putting so much effort to explain in detail so everyone can understand. i like that

  14. Perfect guide every single word important, and thank you very much for putting so much effort to explain in detail so everyone can understand. i like that

  15. i done everything but i stuck at samsung booting text….. i done fully 14 Step 1..2…3 but still stuck.. 🙁

  16. i done everything but i stuck at samsung booting text….. i done fully 14 Step 1..2…3 but still stuck.. 🙁

  17. Nooo…nooo Its done now… it take time after “Wipe data/Factory Reset” but its start now.. so thank you very much… Can you please make tutorial for Metro Ui for Samsung Galaxy Tab 2 p3100 please… your instruction is very clear

  18. Nooo…nooo Its done now… it take time after “Wipe data/Factory Reset” but its start now.. so thank you very much… Can you please make tutorial for Metro Ui for Samsung Galaxy Tab 2 p3100 please… your instruction is very clear

  19. thnks man u r life saver…….download links are so fast…..keep posting such a grt stuff

  20. thnks man u r life saver…….download links are so fast…..keep posting such a grt stuff

  21. thnks man u r life saver…….download links are so fast…..keep posting such a grt stuff

  22. is this 100 % stock the one from samsung ? the one that came with the tab?

  23. is this 100 % stock the one from samsung ? the one that came with the tab?

  24. is this 100 % stock the one from samsung ? the one that came with the tab?

  25. Will this work for Samsung P3100 released in India?
    Jelly bean is real bad, i want to goto original stock rom.

    1. yes it will work, but i am surprised you did not like JB…i have been using the OTA version since september..and JB is just awesome friend.

  26. Will this work for Samsung P3100 released in India?
    Jelly bean is real bad, i want to goto original stock rom.

    1. yes it will work, but i am surprised you did not like JB…i have been using the OTA version since september..and JB is just awesome friend.

  27. Will this work for Samsung P3100 released in India?
    Jelly bean is real bad, i want to goto original stock rom.

    1. yes it will work, but i am surprised you did not like JB…i have been using the OTA version since september..and JB is just awesome friend.

  28. thanks man fucking jb

  29. thanks man fucking jb

  30. thanks man fucking jb

  31. Thank you so much for such a lovely explanation ,it was easily understandable for a first time doer ,keep posting …..over all it was a successful installation…… awesome 🙂

  32. Thank you so much for such a lovely explanation ,it was easily understandable for a first time doer ,keep posting …..over all it was a successful installation…… awesome 🙂

  33. Thank you so much for such a lovely explanation ,it was easily understandable for a first time doer ,keep posting …..over all it was a successful installation…… awesome 🙂

  34. Thanks .. it works perfectly ..
    Question:
    After restore Can I still use the Software update feature from the tab ?

  35. Thanks .. it works perfectly ..
    Question:
    After restore Can I still use the Software update feature from the tab ?

  36. Thanks .. it works perfectly ..
    Question:
    After restore Can I still use the Software update feature from the tab ?

  37. after booting the Samsung logo is flashing for long time what to do now???

  38. after booting the Samsung logo is flashing for long time what to do now???

  39. after booting the Samsung logo is flashing for long time what to do now???

  40. This the best and simple guide..thanks

  41. This the best and simple guide..thanks

  42. This the best and simple guide..thanks

Comments are closed.