Samsung Galaxy S5 is the current flagship device of the Samsung Company, the device offers premium features like fingerprint scanner, water proof build and many more and the cost of the device is also high. However android enthusiasts would always like their device to perform at a maximum efficiency, so they perform various exploits and test various builds on their device which might sometimes go wrong and end up with a bricked device.
If you want to either unbrick your device or restore it to G900PVPU1AND2 update, there is Odin One-Click method available around that will restore your device with just one click. Thanks to rwilco12 of XDA community for making this Odin One click file that contains the Stock ND2 Bootloader, Kernel, Modem and ROM for the Sprint Samsung Galaxy S5(SM-G900P).
This Rom comes with the full Knox Bootloader. The update will not trigger the Yellow Triangle nor will it increment the Odin flash count. This one-click resets your whole phone to the stock ND2 experience that is released by the Samsung. Similar to a factory restore and it may wipe all data.
Follow the below guide to restore your Galaxy S5 to G900PVPU1AND2 build with just one click.
Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components. Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device. To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-G900P! Do not use the procedures discussed here on any other Galaxy S5 (including the Galaxy S5 variants at T-Mobile, US-Cellular, AT&T, Verizon and other International variants) or any other device of Samsung or any other company. You have been warned! Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too. For help on Backup and Restore, check out our exclusive page on that linked right below. ► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS You must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your Sprint Galaxy S5. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy S5 on your computer. ► SAMSUNG GALAXY S5 DRIVERS INSTALLATION GUIDE Download the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy. DOWNLOAD LINK | File name: SM-G900P_ND2_Full_Restore_UNROOTED (Compressed Archive).exe (1.32 GB) Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might delete internal sd card too, your files will remain safe on PC. If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Sprint Galaxy S5 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again. Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Sprint Galaxy S5 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again. It was easy to flash stock KitKat Android 4.4 firmware on your Sprint Galaxy S5, right? Let us know in comments below. Your suggestions and queries, if any, are most welcomed! Via XDASTOCK FIRMWARE INFO
Firmware Version
G900PVPU1AND2
Android Version
Android 4.4.2, KitKat
Is this Official?
Yes! This is the official update by Samsung.
Release Date
April 2014
Credits
rwilco12
  WARNING!
  GUIDE: SPRINT GALAXY S5 OFFICIAL KITKAT 4.4 FIRMWARE
  STEP 0: CHECK DEVICE MODEL NO.
  STEP 1: BACKUP YOUR DEVICE
  STEP 2: INSTALL LATEST DRIVER
   STEP 3: INSTALLATION INSTRUCTIONS
  DOWNLOADS
  ODIN ONE CLICK FILE
  STEP-BY-STEP GUIDE
FEEDBACK US!
what about if your S5 is hard bricked and can not even be put into download mode or restore mode then this is of no help is it really.
what about if your S5 is hard bricked and can not even be put into download mode or restore mode then this is of no help is it really.
what about if your S5 is hard bricked and can not even be put into download mode or restore mode then this is of no help is it really.
I went through all of this and got the “PASS” message, but the phone still won’t come up. After I rooted it it booted up to the password screen, I put in the password and then it went blank. It does the same thing after running this process. Is this because it is encrypted? Is there anything I can do?
I went through all of this and got the “PASS” message, but the phone still won’t come up. After I rooted it it booted up to the password screen, I put in the password and then it went blank. It does the same thing after running this process. Is this because it is encrypted? Is there anything I can do?
I went through all of this and got the “PASS” message, but the phone still won’t come up. After I rooted it it booted up to the password screen, I put in the password and then it went blank. It does the same thing after running this process. Is this because it is encrypted? Is there anything I can do?
Could you help? When I run the executable, it doesn’t say “pass” just all threads completed
Could you help? When I run the executable, it doesn’t say “pass” just all threads completed
Could you help? When I run the executable, it doesn’t say “pass” just all threads completed