T-Mobile Galaxy S6 Update G920TUVU2COF8: Download links and installation guide

T-Mobile Galaxy S6 OF8 update TAR

For your T-Mobile Galaxy S6, we have got new OF8 update in .TAR format to help you update the device to latest software available. The OF8 update was spotted around a month before, but now T-Mobile has made it official.

Here, we are giving you necessary download links and a full guide so that you can easily update your T-Mobile Galaxy S6 to latest firmware update OF8. The official changelog by T-Mobile has it that the OF8 update brings better RAM management, and improved battery life.

After updating the device to its newer firmware, any bugs or issues will be fixed too, if they are related to system apps. in case you have root, TWRp recovery or custom ROm installed, all of these will be removed.

Follow the guide below to easily update your T-Mobile S6 to G920TUVU2COF8 firmware easily, in minimum of efforts.

How to update T-Mobile Galaxy S6 to Android 5.1.1 OF8 firmware


  • OF8 firmware — Direct Link | File: G920TUVU2COF8  G920TTMB2COF8_TMB.zip (1.5 GB)
  • Odin PC software | File: Odin3_v3.10.6.zip (1.6 MB)

Supported devices

  • SAMSUNG GALAXY S6, model no. SM-G920T
  • Don’t try this on any other Galaxy S6 device than the model no. SM-G920T
  • Don’t try on any other device whatsoever!


Disclaimer: Installing an official firmware through Odin doesn’t void your device’s warranty, but it remains an unofficial process and thus you need to be cautious of it. In any case, you only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files. Sometimes, Odin installation may delete everything on your device!

Step 1. Download the Odin software and firmware file from above.

Step 2. Install Galaxy S6 driver (method 1 there!) first of all. Double click the .exe file of drivers to begin installation. (Not required if you have already done this.)

Step 3. Extract the firmware file (G920TUVU2COF8 _G920TTMB2COF8_TMB.zip) now. You can use a free software like 7-zip for this. Install 7-zip, then right click on firmware file and under 7-zip, select ‘Extract here’. You should get the a file in .tar.md5 format now. We will be loading this file into Odin, to be installed on your Verizon S6 (in step 10 below).

Step 4. Extract the Odin file. You should get this file, Odin3 v3.10.6.exe (other files could be hidden, hence not visible).

Step 5. Disconnect your Galaxy S6 from PC if it is connected.

Step 6. Boot Galaxy S6 into download mode:

  1. Power off your S6. Wait 6-7 seconds after screen goes off.
  2. Press and hold the three buttons Volume down + Power + Home together until you see warning screen.
  3. Press Volume Up to continue to download mode.

Step 7. Double click on extracted file of Odin, Odin3 v3.10.6.exe, to open the Odin window as shown below. Be careful with Odin, and do just as said to prevent problems.
Odin 3.10.6

Step 8. Connect your Galaxy S6 to PC now using USB cable. Odin should recognize your device. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.

  • You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
  • If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with device. Mostly, drivers are the problem (look at step 2 above).
  • You can try different USB ports on your PC too.
    Odin 3.10.6 Added message

Step 9. Load the firmware file into Odin. Click the AP button on Odin and the select the .tar.md5 file from Step 3 above.

  • Info: When you load files, Odin checks the md5 of firmware file, which takes time. So, simply wait until that’s done and the firmware file is loaded. Don’t worry if Odin gets unresponsive for a while, it’s normal. Binary size will also show up in Odin.
    Odin 3.10.6 Firmware loaded after md5 check

Step 10. Make sure Re-partition check box is NOT selected, under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step.
Re-partition Remains Off

Step 11. Click the Start button on Odin now to start flashing the firmware on your Galaxy S6. Wait till installation is finished, after which your S6 will reboot automatically. You’ll get PASS message as shown below upon successful installation from Odin.

  • If Odin gets stuck at setup connection, then you need to do steps 6 to 11 again. For this, close Odin, disconnect your S6 and then start from step 6 again.
  • Or, if you get FAIL in the top left box, you need to try flashing again, as stated just above.
    Odin 3.10.6 Pass Message Appears

Step 12. First start of the device may take time, so wait patiently again. Check the Settings > About phone to confirm new firmware.

That’s it. Enjoy the Samsung Galaxy S6 OF8 firmware!

Leave a Reply