Samsung Galaxy Tab Pro 12.2 LTE receives Android 5.1.1 with build T905XXUBOI1

Samsung has started rolling out the Android 5.1.1 Lollipop update for its Galaxy Tab 12.2 Pro LTE today, build no. being T905XXUBOI1, skipping the Android 5.0 update altogether. The previous Android version of Galaxy Tab Pro 12.2 LTE was Android 4.4.2. Guess the Tab Pro 12.2 LTE users will be pretty happy today.

This is more than a year after Galaxy Tab Pro is getting an update. By all accounts, it should also be fixing the Stagefright bug on the tablet. If you haven’t received the OTA update yet, yhen you can download the update from below and install it using our installation guide given below.

Downloads

  • Oi1 firmware — Link | File: T905XXUBOI1_T905OXABOH8_NEE.zip (1.27 GB)
  • Odin PC software — Link | File: Odin3_v3.10.6.zip (1.6 MB)

Supported devices

  • SAMSUNG GALAXY TAB PRO 12.2 LTE, model no. SM-T905
  • Don’t try this on any other Galaxy Tab whose model no. is not SM-T905
  • Don’t try on any other device whatsoever!

Disclaimer: Installing an official firmware through Odin doesn’t void your device’s warranty, but it remains an unofficial process and thus you need to be cautious of it. In any case, you only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files. Sometimes, Odin installation may delete everything on your device!

Step-by-step Guide

Step 1. Download the Odin software and firmware file from above.

Step 2. Install Samsung Galaxy Tab Pro driver (use method 1 there!) first of all. Double click the .exe file of drivers to begin installation. (Not required if you have already done this.)

Step 3. Extract the firmware file now. You can use a free software like 7-zip for this. Install 7-zip, then right click on firmware file and under 7-zip, select ‘Extract here’. You should get the a file in .tar.md5 format now. We will be loading this file into Odin, to be installed on device (in step 9 below)

Step 4. Extract the Odin file. You should get this file, Odin3 v3.10.6.exe (other files could be hidden, hence not visible).

Step 5. Disconnect your Galaxy Tab Pro 12.2 LTE from PC if it is connected.

Step 6. Boot Galaxy Tab Pro 12.2 LTE into download mode:

  • Power off your Note 4, Wait 6-7 seconds after screen goes off.
  • Press and hold the three buttons Volume down + Power + Home together until you see warning screen.
  • Press Volume Up to continue to download mode.

Step 7. Double click on extracted file of Odin, Odin3 v3.10.6.exe, to open the Odin window as shown below. Be careful with Odin, and do just as said to prevent problems.
Odin 3.10.6

Step 8. Connect your T-Mobile Galaxy Tab Pro 12.2 LTE now using USB cable. Odin should recognize your device. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.

  • You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
  • If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with device. Mostly, drivers are the problem (look at step 2 above).
  • You can try different USB ports on your PC too.
    Odin 3.10.6 Added message

Step 9. Load the firmware file into Odin.Click the AP button on Odin and the select the .tar.md5 file from Step 3 above.

  • Info: When you load files, Odin checks the md5 of firmware file, which takes time. So, simply wait until that’s done and the firmware file is loaded. Don’t worry if Odin gets unresponsive for a while, it’s normal. Binary size will also show up in Odin.
    Odin 3.10.6 Firmware loaded after md5 check

Step 10. Make sure Re-partition check box is NOT selected, under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step.
Re-partition Remains Off

Step 11. Click the Start button on Odin now to start flashing the firmware on your Galaxy Tab Pro 12.2 LTE.Wait till installation is finished, after which your device will reboot automatically. You’ll get PASS message as shown below upon successful installation from Odin.

  • If Odin gets stuck at set up connection, then you need to do steps 6 to 11 again. For this, close Odin, disconnect your Galaxy Tab Pro 12.2 LTE then start from step 6 again.
  • Or, if you get FAIL in the top left box, you need to try flashing again, as stated just above.
    Odin 3.10.6 Pass Message Appears

Step 12. First start of the device may take time, so wait patiently again. Check the Settings > About phone to confirm new firmware.

That’s it. Enjoy your T-Mobile Galaxy Tab Pro 12.2 LTE on the latest Android 5.1.1 update with OI1 firmware!

Posted by
Kapil Malani

A die-hard Liverpool FC fan, Kapil is a big fan of Batman, Android and street Cricket. In that order, probably. Email: [email protected]