Root AT&T Infuse 4G and Install Clockworkmod CWM Recovery with UCLB3 Firmware

UCLB3 is the latest Android 2.3.6 Gingerbread firmware for the AT&T Samsung Infuse 4G. And thanks to XDA Forum Member jscott30, you can flash a pre-rooted UCLB3 firmware that also has ClockworkMod (CWM) recovery pre-installed. This is very useful if you want to flash a custom ROM on your phone, as it can be used as a starting point before trying to attempt to install custom ROMs and the like.

Remember to read each and every step below carefully before attempting the procedure, so that you don’t miss anything and have no problems in flashing the firmware. Read everything twice if you have to.

Read on to find out how you can install the rooted UCLB3 firmware on your AT&T Infuse 4G.

Compatibility

This ROM and the guide below is compatible only and only with AT&T Infuse 4G, model number I997. It’s not compatible with any other device. Do not try this even on the Rogers Infuse 4G. Check your device’s model number in: Settings » About phone. If it’s not I997, please do not attempt this.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.

How to Install UCLB3 Firmware with Root and ClockworkMod Recovery on AT&T Infuse 4G

  1. This procedure will wipe all your apps, data and settings (but it will NOT touch your SD cards, so don’t worry about those). Backup your Apps and important data — bookmarks, contacts, SMS, APNs (internet settings), etc. This Android backup guide would help you.
    Important! Don’t forget to at least make a backup of your APN settings, which you can restore later if your data connection does not work after installing the ROM. Use the backup guide to find out how.
  2. Download and install the drivers for the phone on the computer.
    Download links: 32 bit (x86) Windows | 64-bit (x64) Windows
  3. Download the UCLB3 firmware package.
    Download Link  |  Alternate Link  |  Filename: SGH-I997_UCLB3_CWM_root_deodex_busybox.rar
  4. Extract the SGH-I997_UCLB3_CWM_root_deodex_busybox.rar file downloaded above using a software like 7-zip or WinRAR to a convenient location on your computer.
  5. After extraction, you’ll get a folder named SGH-I997_UCLB3_CWM_root_deodex_busybox with the following 3 files inside it:
    1. I997UCLB3-CWM-root-deodex-busybox.tar.md5
    2. Odin3 v1.7.exe
    3. Readme.txt [ignore this one]
  6. Now, turn off your phone, then boot into recovery. To do this, turn the phone off, disconnect USB cable, hold the Volume Up + Volume Down + Power buttons together, release the power button when Samsung logo appears, but continue to hold volume buttons until recovery screen appears, then let go of them.
  7. Here, using the volume keys, highlight the delete all user data option and select it using the power button. Select Yes on the next screen (using the power button) to confirm data wipe. Remember, this will only wipe your apps and settings, but will leave all your personal files on the SD card intact.
  8. After data wipe, go back to the main recovery menu, then select reboot system now. Important! Once the phone starts rebooting, remove the battery. Then re-insert the battery (but don’t turn the phone on again) and go to the next step.
  9. Open Odin (from step 5.2) — double-click the Odin3 v1.7.exe file.
  10. Click on the PDA button in Odin, then select I997UCLB3-CWM-root-deodex-busybox.tar.md5 file obtained in step 5.1.
  11. Now, put the Infuse 4G in Download Mode — connect USB cable to PC, then connect the cable to the phone while pressing and holding the Volume Up and Down buttons. The phone will say Downloading on the screen.
  12. After connecting phone to computer in download mode, Odin will say Added!! in the message box below. If it does not, make sure the drivers are installed (step 2).
  13. Click the Start button in Odin to start flashing the UCLB3 firmware on your Infuse 4G. After flashing is complete, you’ll get PASS message in Odin and the phone will automatically reboot. You can now safely disconnect the phone from the computer.
    IMPORTANT Note: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, disconnect the phone from the PC, close ODIN, remove battery, re-insert it, and do the procedure again from Step 9.
  14. If you encounter any roadblocks while flashing the firmware, let us know and we’ll help you out.

The UCLB3 firmware is now installed on your AT&T Infuse 4G, rooted and with ClockworkMod recovery installed. Let us know how it works for you, in the comments below.

Via XDA

125 Comments

  1. work great.. no problems at all, thanks a lot. i had the official ipdate of 2.3.6 of infuse and this was the only method that works…

  2. work great.. no problems at all, thanks a lot. i had the official ipdate of 2.3.6 of infuse and this was the only method that works…

  3. Worked flawlessly and now am about to do a custom upgrade to ICS 4.0.4
    Thanks for your work!

    1. sir do it works on samsung galaxy dous os 2.3.6?

    2. Sorry, It won’t

  4. Worked flawlessly and now am about to do a custom upgrade to ICS 4.0.4
    Thanks for your work!

      1. ☣ ÀÐíκ†Ü§ ™ ☤

        sir do it works on samsung galaxy dous os 2.3.6?

        1. Sorry, It won’t

  5. in odin should i check off re partition

    1. Don’t select Re-Partition checkbox. It needs to be selected/ticked only when using the PIT file in PIT box in Odin. So, just do as said above, don’t check uncheck anything else than as above!

  6. in odin should i check off re partition

    1. Don’t select Re-Partition checkbox. It needs to be selected/ticked only when using the PIT file in PIT box in Odin. So, just do as said above, don’t check uncheck anything else than as above!

  7. in odin should i check off re partition

    1. Don’t select Re-Partition checkbox. It needs to be selected/ticked only when using the PIT file in PIT box in Odin. So, just do as said above, don’t check uncheck anything else than as above!

  8. When I put the phone in Download Mode, Odin doesn’t see it for some reason. The message “Added!!” never appears. I’m sure I have the drivers installed to…

    1. Make sure you have drivers installed. Try again and follow each and every step carefully…. it should recognize your phone and Added message should appear. Try Odin 3.04, that might solve it – link: http://www.mediafire.com/?189h7dqldccnrq8

    2. Odin 3.04 got it working for me. Even after I had an incident of the phone getting shut down mid-flash after Odin 1.7.1 failing out on me several times and getting stuck on ‘Setting Connection…’ on others. Thanks so much!

  9. When I put the phone in Download Mode, Odin doesn’t see it for some reason. The message “Added!!” never appears. I’m sure I have the drivers installed to…

    1. Make sure you have drivers installed. Try again and follow each and every step carefully…. it should recognize your phone and Added message should appear. Try Odin 3.04, that might solve it – link: http://www.mediafire.com/?189h7dqldccnrq8

      1. Odin 3.04 got it working for me. Even after I had an incident of the phone getting shut down mid-flash after Odin 1.7.1 failing out on me several times and getting stuck on ‘Setting Connection…’ on others. Thanks so much!

  10. When I put the phone in Download Mode, Odin doesn’t see it for some reason. The message “Added!!” never appears. I’m sure I have the drivers installed to…

    1. Make sure you have drivers installed. Try again and follow each and every step carefully…. it should recognize your phone and Added message should appear. Try Odin 3.04, that might solve it – link: http://www.mediafire.com/?189h7dqldccnrq8

      1. Odin 3.04 got it working for me. Even after I had an incident of the phone getting shut down mid-flash after Odin 1.7.1 failing out on me several times and getting stuck on ‘Setting Connection…’ on others. Thanks so much!

  11. the original download link is gone, and the second is hard to find the actual real download link, little help

    1. and nvm…i had to add a jumbo files account

  12. the original download link is gone, and the second is hard to find the actual real download link, little help

    1. and nvm…i had to add a jumbo files account

  13. the original download link is gone, and the second is hard to find the actual real download link, little help

    1. and nvm…i had to add a jumbo files account

  14. after being rooted my phones wifi is not working properly

  15. after being rooted my phones wifi is not working properly

  16. after being rooted my phones wifi is not working properly

  17. after being rooted my phones wifi is not working properly

  18. I can’t download the UCB3 firmware, the first link doesnt work and the Jumbo Files wont allow me to download it.

    1. And I did create a jumbo files account

  19. I can’t download the UCB3 firmware, the first link doesnt work and the Jumbo Files wont allow me to download it.

    1. And I did create a jumbo files account

  20. I can’t download the UCB3 firmware, the first link doesnt work and the Jumbo Files wont allow me to download it.

    1. And I did create a jumbo files account

  21. I installed the same but from the first boot itself it is not going forward after viewing the AT&T logo please help. the boot up got stucked showing the AT&T logo and being restarted several times

  22. I installed the same but from the first boot itself it is not going forward after viewing the AT&T logo please help. the boot up got stucked showing the AT&T logo and being restarted several times

  23. I installed the same but from the first boot itself it is not going forward after viewing the AT&T logo please help. the boot up got stucked showing the AT&T logo and being restarted several times

  24. do this works on galaxy y dous running gingerbread 2.3.6?

  25. ☣ ÀÐíκ†Ü§ ™ ☤

    do this works on galaxy y dous running gingerbread 2.3.6?

  26. ☣ ÀÐíκ†Ü§ ™ ☤

    do this works on galaxy y dous running gingerbread 2.3.6?

  27. man i m soo tense , when i connect odin wd infuse 4g, its start working after 6 sec when its goes to factory phone goes off on download mode, tell me why my phone not still on download why its restart ,

  28. why phone goes shut after 6 7sec on download,coz of this odin did not flash and gets show diconnect

  29. man i m soo tense , when i connect odin wd infuse 4g, its start working after 6 sec when its goes to factory phone goes off on download mode, tell me why my phone not still on download why its restart ,

  30. man i m soo tense , when i connect odin wd infuse 4g, its start working after 6 sec when its goes to factory phone goes off on download mode, tell me why my phone not still on download why its restart ,

  31. why phone goes shut after 6 7sec on download,coz of this odin did not flash and gets show diconnect

  32. why phone goes shut after 6 7sec on download,coz of this odin did not flash and gets show diconnect

  33. Almost every link on this page doesn’t work mate… wtf?

  34. Almost every link on this page doesn’t work mate… wtf?

  35. Almost every link on this page doesn’t work mate… wtf?

  36. do this work on samsung galaxy y running on 2.3.6 gingerbread?

  37. john lorence ponceja

    do this work on samsung galaxy y running on 2.3.6 gingerbread?

  38. john lorence ponceja

    do this work on samsung galaxy y running on 2.3.6 gingerbread?

  39. sir, do it work on DTC GT5?

  40. will it work on alcatel one touch 995

  41. will it work on alcatel one touch 995

  42. will it work on alcatel one touch 995

  43. necesito el firmware UCLB3 SGH-I997_UCLB3_CWM_root_deodex_busybox.rar por favor, mandenme el link de descarga a mi coreo por favor

  44. necesito el firmware UCLB3 SGH-I997_UCLB3_CWM_root_deodex_busybox.rar por favor, mandenme el link de descarga a mi coreo por favor

  45. necesito el firmware UCLB3 SGH-I997_UCLB3_CWM_root_deodex_busybox.rar por favor, mandenme el link de descarga a mi coreo por favor

  46. does it works on y duos gt s6102

  47. does it works on y duos gt s6102

  48. does it works on y duos gt s6102

  49. HELP!!! I don’t see the CWM recovery icon, just the super user one..is there something wrong?

  50. HELP!!! I don’t see the CWM recovery icon, just the super user one..is there something wrong?

  51. HELP!!! I don’t see the CWM recovery icon, just the super user one..is there something wrong?

  52. sir does this work in a tecno n3 phone that is 2.3.6 version or does it work in all ginger bread smilingt

  53. sir does this work in a tecno n3 phone that is 2.3.6 version or does it work in all ginger bread smilingt

  54. sir does this work in a tecno n3 phone that is 2.3.6 version or does it work in all ginger bread smilingt

  55. why isnt the link there? where is it?

  56. why isnt the link there? where is it?

  57. why isnt the link there? where is it?

  58. I has worked great.
    Thanks for your help!

  59. Gabriel Baziramwabo

    I has worked great.
    Thanks for your help!

  60. Gabriel Baziramwabo

    I has worked great.
    Thanks for your help!

  61. where do i need to download the drivers in my phone or pc?? reply ASAP

    1. On PC of course.

  62. where do i need to download the drivers in my phone or pc?? reply ASAP

  63. where do i need to download the drivers in my phone or pc?? reply ASAP

  64. Can any 1 tell me how can i upgrade my iball andi 4m which is having 2.3.4 to android 3.0
    ?????

  65. Can any 1 tell me how can i upgrade my iball andi 4m which is having 2.3.4 to android 3.0
    ?????

  66. Can any 1 tell me how can i upgrade my iball andi 4m which is having 2.3.4 to android 3.0
    ?????

  67. will it work for Samsung Galaxy Y S5360? if it yes? ill gonna try it now..

  68. will it work for Samsung Galaxy Y S5360? if it yes? ill gonna try it now..

  69. will it work for Samsung Galaxy Y S5360? if it yes? ill gonna try it now..

  70. the problem is that samsung i997 dos n’t recognize the usb at the download mode please check that

  71. the problem is that samsung i997 dos n’t recognize the usb at the download mode please check that

  72. the problem is that samsung i997 dos n’t recognize the usb at the download mode please check that

  73. it says files have been deleted

  74. pls get me another link

  75. it says files have been deleted

  76. it says files have been deleted

  77. pls get me another link

  78. pls get me another link

  79. all of these links have been deleted. eager to find this file!! any help appreciated??

  80. all of these links have been deleted. eager to find this file!! any help appreciated??

Comments are closed.