Official Android 4.1 Jelly Bean OTA Update for Motorola Razr (GSM) XT910

motorola-razr-xt910-16gb-dual-core-3g-wifi-8mpx-tela-43_MLB-F-3217463108_102012

This week has been pretty good to owners of the Verizon Droid RAZR/RAZR MAXX as Verizon finally released the official Android 4.1.2 Jelly Bean update for the device. Now, thanks to the awesome XDA community, the final retail update for the international Motorola RAZR/RAZR MAXX has also been leaked and is available for manual installation.

The update brings all the goodies from Android 4.1 – improved performance and smoothness, actionable and expandable notifications, and Google Now to name a few, but there are some other major changes made by Motorola as well. A lot of Motorola apps and widgets, such as Social Location, Alarm and Timer, Motocast etc have been removed, with apps such as the clock and gallery replaced by the stock Android versions found on Nexus devices (the full changelog can be seen here).

Before you manually install the update though, keep in mind that while official, this update is still a leaked version and isn’t yet being rolled out by Motorola and therefore might have some issues. That said, it should still be stable enough for everyday use and you will able to get the official update later on whenever Motorola releases it.

So grab your RAZR/RAZR MAXX and continue reading to find out how you can update to Android 4.1 Jelly Bean manually.

Compatibility

This firmware and the guide below are compatible only and only with the GSM Motorola RAZR/RAZR MAXX, model number XT910. Do not try it on the Verizon Droid RAZR/RAZR MAXX nor on any other device. Confirm your device model in Settings » About phone before proceeding.

Warning!

The methods and procedures discussed here are considered risky, so try them out at your own risk, and make sure to read each step carefully before attempting anything. We will not be held responsible if anything goes wrong.

Requirements:

  1. You need to have a microSD card on your phone in order to install the update, as the update can’t be manually installed from the internal storage.
  2. Your phone must be on the official Android 4.0 firmware with system version 672.180.41.XT910.Retail.en.EU – also, the ROM should be 100% stock and unmodified. Confirm the system version in the Settings » About phone menu on the phone.
    • NOTE: If you’ve rooted, that’s fine as we can disable root temporarily to install the update, but otherwise the system files should be totally unchanged for the update’s installation to succeed.
  3. Make sure your phone’s battery is adequately charged – a minimum of 50% is recommended.

How to Update RAZR/RAZR MAXX to Android 4.1.2 Jelly Bean

  1. While this procedure will not wipe anything on your phone, it is still recommended to take a backup of all your apps and personal data, such as SMS, contacts, etc. So make sure to take a backup of important files before attempting this procedure, taking the help of this Android backup guide.
  2. Download the update file.
    Download Link | Filename: Blur_Version.672.180.41.XT910.Retail.en.EU.zip
  3. If your phone is rooted, perform the following steps before moving on to step 4 (skip step 3 if your device is not rooted):
    1. Download OTA RootKeeper from the Play Store. .
    2. Launch OTA RootKeeper on your phone and backup your Root status by clicking the Protect Root button.
    3. Then, click the Temp Unroot option in OTA Rootkeeper to remove root before you flash the update. Close OTA RootKeeper.
  4. Copy the update file to the microSD card on your phone. Don’t extract the file, simply copy it to the phone.
  5. Switch off your phone (also disconnect it from the PC if it is connected).
  6. Boot into stock recovery. To do that, turn the phone off. Then turn it on while pressing and holding down both the Volume Up + Volume Down buttons till the boot selection menu shows up. Here, scroll down to highlight the Recovery option using the volume down button, then select it using the volume up button. You should now see a green Android with a triangle on the screen; here, press both volume up and volume down buttons together to boot phone into recovery.
    • In recovery, use the volume buttons to navigate and the power button to select options.
  7. Wipe the cache by selecting the wipe cache option. This will not erase any of your data, don’t worry about that.
  8. Now select “install/apply update from external sdcard/storage”. Scroll to the update file (Blur_Version.672.180.41.XT910.Retail.en.EU.zip) you transferred to the phone and select it. The update will now start installing.
  9. This is a full OS upgrade and will take approximately 8 minutes. So be patient and do not panic.
  10. Your phone may reboot a couple of times during the entire upgrade process, and finally it should boot back up on its own into the wonderful world of Jelly Bean Android 4.1.2.
  11. [Restore Root] If you were rooted before installing the update but temporarily unrooted according to step 3, then simply open the OTA RootKeeper app and click on the Restore Root button to restore root access. Of course, you can skip this step if you do not wish to restore root access at this time.

The Android 4.1 Jelly Bean update is now installed on your RAZR / RAZR MAXX, and we hope you enjoy the various new features and goodies that come with it. And if you run into any roadblocks while performing the manual update, leave a comment below and we’ll help you out.

Via: XDA

13 Comment

  1. Antony3003 says: Reply

    no se puede..me sale Instalación abortada..lo reintento varias y no se puede..que crees que pase? gracias

  2. Guest says: Reply

    i have system version as 673.94.328.XT910.PSHAsiaRetail.en.03

  3. ankit says: Reply

    i have system version as 673.94.328.XT910.PSHAsiaRetail.en.03

    will this update work for me?

    1. Abhijeet Mishra says: Reply

      The update is only for the European firmware, so won’t work on the Asian version. Sorry. 🙂

  4. idris says: Reply

    i tried to install this on 673.94.328 firmware for xt910 it is giving me an error.

  5. ZEKE says: Reply

    i have version 673.94.324.XT910.MERetail.en.06

    is it work on it ?

    1. ZEKE says: Reply

      never mind 🙂
      I just upgrade to jelly bean 4.1.2 and it’s works fine

    2. dodo says: Reply

      Hi Zeke, i have the same version. How did u do it? upgrade to jelly bean 4.1.2?
      thx

      1. ZEKE says: Reply

        I installed Retail British
        Version: 9.8.2O-124_SPUEM-14 FULL

        just flash it in Fastboot by RSD Lite.

        http://fwteam.grupoandroid.com/RAZR%20XT910/9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip

  6. Leen says: Reply

    pls have an update for version 673.94.328.XT910.AsiaRetail.en.03.. tnx..

  7. Panos says: Reply

    could you please tell me if i will still see the greek language on my menu or keyboard?

  8. Santhosh Kumar Mohan says: Reply

    hi, i am having a XT910 with system version “673.94.328.XT910.AsiaRetail.en.03” . Can you please let me know the procedure and the files for upgrading my device to JellyBean

  9. Yadul Manoj says: Reply

    I am having XT910 with system version “673.94.324.XT910.MERetail.en.06” . Will the update work in my device?

Leave a Reply