ICS Android 4.0.4 Update for Samsung Galaxy S2 International Version i9100

The disappointing news a few days ago that the Galaxy S2 will not be getting updated to Android 4.0.4 and will be stuck at 4.0.3 has been null and voided by an actual Android 4.0.4 firmware that has leaked for the phone — XXLQ5. Android 4.0.4 is quite smoother and faster and more stable than 4.0.3, so people stuck on the not-so-smooth 4.0.3 on the Galaxy S2 will be very happy.

Keep in mind that XXLQ5 is a leaked hence unfinished firmware, and while it may work without any major problems, it may have a few bugs and issues. There are reports that the firmware is quite smoother than previous ones without any noticeable problems, so it is completely usable as a daily driver.

Read on to find out how you can update your Galaxy S2 to Android 4.0.4 with the XXLQ5 firmware.

Compatibility

This firmware and the guide below are compatible only and only with Galaxy S2, model number I9100. It’s not compatible with the I9100G or any other device. Check your device’s model number in: Settings » About phone.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.

How to Install XXLQ5 Android 4.0.4 Firmware on Galaxy S2 i9100

  1. This procedure will wipe all your apps, data and settings (but it will NOT touch your SD cards, so don’t worry about those). Backup your Apps and important data — bookmarks, contacts, SMS, APNs (internet settings), etc. This Android backup guide would help you.
    Important! Don’t forget to at least make a backup of your APN settings, which you can restore later if your data connection does not work after installing the ROM. Use the backup guide to find out how.
  2. It’s important you’ve the proper drivers for the phone installed. If you have installed Samsung’s Kies software, you already have the drivers, so download them only if you haven’t installed Kies.
    Download links: 32 bit (x86) Windows | 64-bit (x64) Windows
  3. Download the firmware.
    Download XXLQ5 | Filename: I9100XXLQ5_I9100OXALQ5_OXA.zip | Size: 387 MB
  4. Extract the downloaded zip file once to get the following files (you might see the file name end with .tar instead of .md5 as the file extension is usually hidden, so it’s normal):
    1. I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship.tar.md5
    2. GT-I9100-MULTI-CSC-OXALQ5.tar.md5
    3. MODEM_I9100XXLQ5_REV_02_CL1165929.tar.md5
    4. u1_02_20120326_emmc_EXT4_8GB.pit [ignore this one]
  5. Download Odin 1.85 from → here.
    Filename: Odin 1.85.zip | Size: 199 KB
  6. Extract the contents of the Odin 1.85.zip file to a folder.
  7. Disconnect your phone if it’s connected to PC, then switch it off.
  8. Now, put the Galaxy S2 in Download Mode — press and hold these keys together: Volume Down + Home + Power. A Warning! screen will come up; press Volume Up key to continue to enter Download Mode.
  9. Open Odin — double-click the Odin3 v1.85.exe that you got after extracting the file Odin 1.85.zip.
  10. Connect your phone to PC now. You should get the message “Added!” under Odin’s message box in the bottom left.
    If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed (check step 2). Also, uninstall Kies from the Control Panel as well (this will leave the drivers on the computer but remove Kies which can interfere with the procedure).
  11. In ODIN, do the following:
    1. Click on PDA and select I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship.tar.md5 (from step 4.1)
    2. Click on PHONE and select MODEM_I9100XXLQ5_REV_02_CL1165929.tar.md5.
    3. Click on CSC and select GT-I9100-MULTI-CSC-OXALQ5.tar.md5.
  12. Important! Do not make any other changes in Odin except selecting the required files as given in step 11. Leave all other options as they are. Your ODIN screen should look this after making necessary changes (the COM# in the yellow box may be different which is normal):
  13. Now, hit the START button to start flashing the firmware. When the flashing is complete, your phone will automatically reboot — and when you see the Samsung logo, you can safely unplug the cable. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. What to do if Odin gets stuck: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 9.
  14. If you run into any roadblocks while flashing the firmware, let us know and we’ll help you out.

XXLQ5 firmware, based on Android 4.0.4 Ice Cream Sandwich is now up and running on your Galaxy S2 i9100. Try it out and let us know how it works for you, in the comments below.

239 Comments

  1. Only work notification bar. =(

  2. Only work notification bar. =(

  3. Only work notification bar. =(

  4. Works fine and I’m using i9100T

    1. Do you notice performance/smoothness improvements?

  5. MY PHONE GT-I9100 XXKI4 THIS WILL WORK IN MY PHONE

  6. MY PHONE GT-I9100 XXKI4 CAN THIS UPDATE WILL WORK IN MY PHONE PLZ …… HELP ME

    1. plz help me

  7. Works fine and I’m using i9100T

    1. Do you notice performance/smoothness improvements?

  8. Works fine and I’m using i9100T

    1. Do you notice performance/smoothness improvements?

  9. ive updated it last nite, no brightness slide on its notification bar..

    1. can you say what is your mobile baseband versiion

  10. MY PHONE GT-I9100 XXKI4 THIS WILL WORK IN MY PHONE

  11. MY PHONE GT-I9100 XXKI4 THIS WILL WORK IN MY PHONE

  12. MY PHONE GT-I9100 XXKI4 CAN THIS UPDATE WILL WORK IN MY PHONE PLZ …… HELP ME

    1. plz help me

  13. MY PHONE GT-I9100 XXKI4 CAN THIS UPDATE WILL WORK IN MY PHONE PLZ …… HELP ME

    1. plz help me

  14. i have the same problem( ive updated it last nite, no brightness slide on its notification bar..)

  15. Only work notification bar. =(

  16. I only select & upload PDA file(first file) and working well but phone(second file) & CSC(third file) files are not uploading hence result is failed during writing all file. So first file is writing well except 2 & 3.

    I had before android 4.0.3 on my galaxy s2.

    Are these two files(2 & 3) are important ?

  17. yes i have same same.

    I
    only select & upload PDA file(first file) and working well but
    phone(second file) & CSC(third file) files are not uploading hence
    result is failed during writing all file. So first file is writing well
    except 2 & 3.

    I had before android 4.0.3 on my galaxy s2.

    Are these two files(2 & 3) are important ?

    1. No, it’s fine 🙂

  18. ive updated it last nite, no brightness slide on its notification bar..

    1. can you say what is your mobile baseband versiion

  19. ive updated it last nite, no brightness slide on its notification bar..

    1. can you say what is your mobile baseband versiion

  20. i have the same problem( ive updated it last nite, no brightness slide on its notification bar..)

  21. i have the same problem( ive updated it last nite, no brightness slide on its notification bar..)

  22. Only work notification bar. =(

  23. Only work notification bar. =(

  24. I only select & upload PDA file(first file) and working well but phone(second file) & CSC(third file) files are not uploading hence result is failed during writing all file. So first file is writing well except 2 & 3.

    I had before android 4.0.3 on my galaxy s2.

    Are these two files(2 & 3) are important ?

  25. I only select & upload PDA file(first file) and working well but phone(second file) & CSC(third file) files are not uploading hence result is failed during writing all file. So first file is writing well except 2 & 3.

    I had before android 4.0.3 on my galaxy s2.

    Are these two files(2 & 3) are important ?

  26. yes i have same same.

    I
    only select & upload PDA file(first file) and working well but
    phone(second file) & CSC(third file) files are not uploading hence
    result is failed during writing all file. So first file is writing well
    except 2 & 3.

    I had before android 4.0.3 on my galaxy s2.

    Are these two files(2 & 3) are important ?

    1. No, it’s fine 🙂

  27. yes i have same same.

    I
    only select & upload PDA file(first file) and working well but
    phone(second file) & CSC(third file) files are not uploading hence
    result is failed during writing all file. So first file is writing well
    except 2 & 3.

    I had before android 4.0.3 on my galaxy s2.

    Are these two files(2 & 3) are important ?

    1. No, it’s fine 🙂

  28. How can I root this?

  29. have different?

  30. How can I root this?

  31. How can I root this?

  32. have different?

  33. have different?

  34. Video playback doesn’t work for me; as well as recording videos and taking pictures! Someone help!

    1. Re-flash and don’t root -,-

  35. Upgraded works great !!

    1. Does the brightness slide still work with your upgrade?

  36. Video playback doesn’t work for me; as well as recording videos and taking pictures! Someone help!

    1. Re-flash and don’t root -,-

  37. Video playback doesn’t work for me; as well as recording videos and taking pictures! Someone help!

    1. Re-flash and don’t root -,-

  38. Upgraded works great !!

    1. Does the brightness slide still work with your upgrade?

  39. Upgraded works great !!

    1. Does the brightness slide still work with your upgrade?

  40. please upload with mediafire

  41. no camera…no videos…too bad!!!

    1. YES ! ME TOO!!! i figured it got like that after flashing the root file !
      So i re-flashed it and didn’t root -,-

    2. how to reflash ?

  42. please upload with mediafire

  43. please upload with mediafire

  44. no camera…no videos…too bad!!!

    1. YES ! ME TOO!!! i figured it got like that after flashing the root file !
      So i re-flashed it and didn’t root -,-

      1. how to reflash ?

  45. no camera…no videos…too bad!!!

    1. YES ! ME TOO!!! i figured it got like that after flashing the root file !
      So i re-flashed it and didn’t root -,-

      1. how to reflash ?

  46. Hi
    I’m new with upgarding on my galaxy S2. but I have some question in order to be sure for upgrading:
    – my Andriod version is: 2.3.5
    – Baseband version is: I9100XXKI4
    – Kernel version is: 2.6.35.7 -I9100JPKJ2-CL655700 root@DELL143#2
    – Build number is: GINGERBREAD.JPKJ2
    with above information of my S2, can I upgrade my galaxy s2 to andriod 4.0.4 XXLQ5?
    I will appreciate your help.

    1. Yes Aysha u can, To know how can you do it mail me at “[email protected]” coz i also have Galaxy S2 and i have updated my phone Yesterday.

  47. what is different between
    XXLQ5 and XXLPQ, which one is the latest one?

    1. XXLQ5 is for Europe and XXLPQ is for Asia

    2. My S2’s Camera screen doesn’t show up but it can take pictures…. Help please

  48. Hi
    I’m new with upgarding on my galaxy S2. but I have some question in order to be sure for upgrading:
    – my Andriod version is: 2.3.5
    – Baseband version is: I9100XXKI4
    – Kernel version is: 2.6.35.7 -I9100JPKJ2-CL655700 root@DELL143#2
    – Build number is: GINGERBREAD.JPKJ2
    with above information of my S2, can I upgrade my galaxy s2 to andriod 4.0.4 XXLQ5?
    I will appreciate your help.

    1. Yes Aysha u can, To know how can you do it mail me at “[email protected]” coz i also have Galaxy S2 and i have updated my phone Yesterday.

  49. Hi
    I’m new with upgarding on my galaxy S2. but I have some question in order to be sure for upgrading:
    – my Andriod version is: 2.3.5
    – Baseband version is: I9100XXKI4
    – Kernel version is: 2.6.35.7 -I9100JPKJ2-CL655700 root@DELL143#2
    – Build number is: GINGERBREAD.JPKJ2
    with above information of my S2, can I upgrade my galaxy s2 to andriod 4.0.4 XXLQ5?
    I will appreciate your help.

    1. Yes Aysha u can, To know how can you do it mail me at “[email protected]” coz i also have Galaxy S2 and i have updated my phone Yesterday.

  50. what is different between
    XXLQ5 and XXLPQ, which one is the latest one?

    1. XXLQ5 is for Europe and XXLPQ is for Asia

    2. My S2’s Camera screen doesn’t show up but it can take pictures…. Help please

  51. what is different between
    XXLQ5 and XXLPQ, which one is the latest one?

    1. XXLQ5 is for Europe and XXLPQ is for Asia

    2. My S2’s Camera screen doesn’t show up but it can take pictures…. Help please

  52. GUYS DON’T USE THE ROOT FILE LISTED ABOVE !
    it causes video playback not to work correctly (When you play a video you can hear the audio but you only see black) and the camera is the same you can take pictures but the screen appears black…
    If you already had rooted your SGS2 and you are having this problem re-flash and don’t root -,-

  53. GUYS DON’T USE THE ROOT FILE LISTED ABOVE !
    it causes video playback not to work correctly (When you play a video you can hear the audio but you only see black) and the camera is the same you can take pictures but the screen appears black…
    If you already had rooted your SGS2 and you are having this problem re-flash and don’t root -,-

  54. GUYS DON’T USE THE ROOT FILE LISTED ABOVE !
    it causes video playback not to work correctly (When you play a video you can hear the audio but you only see black) and the camera is the same you can take pictures but the screen appears black…
    If you already had rooted your SGS2 and you are having this problem re-flash and don’t root -,-

  55. I Got My Cell Updated With The NEW XXLQ5 Update For Samsung Galaxy S2 But Since Then My ODIN IS’NT BEEN ABLE To Detect My Cell Phone For Flashing As I Wanted MY Cell To Revert Back To 4.0.3 PLEASE HELP

  56. Hi, from Portugal, I did the upgrade without problems, seems as it works well but the scenn have a fixed backgroud info in several lines, like that HW:REV_ / PDA:I90100XXLQ5 / Phone:
    I90100XXLQ5 / CSC: Unknow / UniqueNumber: N
    How can I delete this info?
    Thanks

    1. That’s my problem also, then when you remove your simcard it will go away.. Looking for resolution to fix this.. so frustrated.. 🙁

    2. did u find the solution …i have a same problem

    3. .i have a same problem

  57. I Got My Cell Updated With The NEW XXLQ5 Update For Samsung Galaxy S2 But Since Then My ODIN IS’NT BEEN ABLE To Detect My Cell Phone For Flashing As I Wanted MY Cell To Revert Back To 4.0.3 PLEASE HELP

  58. I Got My Cell Updated With The NEW XXLQ5 Update For Samsung Galaxy S2 But Since Then My ODIN IS’NT BEEN ABLE To Detect My Cell Phone For Flashing As I Wanted MY Cell To Revert Back To 4.0.3 PLEASE HELP

  59. Ok I have the XXLQ5 rooted on my s2. I am in asia. and am experiencing problems with camera, not sure about video playback. Can I just reflash and revert back to previous rom, I want my phone rooted.

  60. Hi, from Portugal, I did the upgrade without problems, seems as it works well but the scenn have a fixed backgroud info in several lines, like that HW:REV_ / PDA:I90100XXLQ5 / Phone:
    I90100XXLQ5 / CSC: Unknow / UniqueNumber: N
    How can I delete this info?
    Thanks

    1. Samsung Galaxy S2 newbie

      That’s my problem also, then when you remove your simcard it will go away.. Looking for resolution to fix this.. so frustrated.. 🙁

    2. Samsung Galaxy S2 newbie

      That’s my problem also, then when you remove your simcard it will go away.. Looking for resolution to fix this.. so frustrated.. 🙁

      1. did u find the solution …i have a same problem

      2. .i have a same problem

  61. Hi, from Portugal, I did the upgrade without problems, seems as it works well but the scenn have a fixed backgroud info in several lines, like that HW:REV_ / PDA:I90100XXLQ5 / Phone:
    I90100XXLQ5 / CSC: Unknow / UniqueNumber: N
    How can I delete this info?
    Thanks

    1. Samsung Galaxy S2 newbie

      That’s my problem also, then when you remove your simcard it will go away.. Looking for resolution to fix this.. so frustrated.. 🙁

      1. did u find the solution …i have a same problem

      2. .i have a same problem

  62. Ok I have the XXLQ5 rooted on my s2. I am in asia. and am experiencing problems with camera, not sure about video playback. Can I just reflash and revert back to previous rom, I want my phone rooted.

  63. Ok I have the XXLQ5 rooted on my s2. I am in asia. and am experiencing problems with camera, not sure about video playback. Can I just reflash and revert back to previous rom, I want my phone rooted.

  64. my phone
    PDA: I9100XWLP7MODEM: I9100XXLP7CSC: I9100XEULP5
    so i can i upgrade it or not cause im afraid modem csc r for wifi and mobile sim card use which is diffrent for each country so can only use pda file to upgrade???

  65. my phone
    PDA: I9100XWLP7MODEM: I9100XXLP7CSC: I9100XEULP5
    so i can i upgrade it or not cause im afraid modem csc r for wifi and mobile sim card use which is diffrent for each country so can only use pda file to upgrade???

  66. my phone
    PDA: I9100XWLP7MODEM: I9100XXLP7CSC: I9100XEULP5
    so i can i upgrade it or not cause im afraid modem csc r for wifi and mobile sim card use which is diffrent for each country so can only use pda file to upgrade???

  67. I have this error on my screen after updating it to 4.04.. can someone help me remove this? help!

  68. Samsung Galaxy S2 newbie

    I have this error on my screen after updating it to 4.04.. can someone help me remove this? help!

  69. Samsung Galaxy S2 newbie

    I have this error on my screen after updating it to 4.04.. can someone help me remove this? help!

  70. just updated my S2 using Kies in UK, Android 4.04.

  71. just updated my S2 using Kies in UK, Android 4.04.

  72. just updated my S2 using Kies in UK, Android 4.04.

  73. Hi , I have installed in my galaxy s2 “XXLQ6” which is not indian
    version. Now i want to download indian firmware in my phone. I have
    tried “DDLPA ” but its not getting install, may be due to lack of .PIT , PDA and CSC file. Can you advise me on same.

  74. Hi , I have installed in my galaxy s2 “XXLQ6” which is not indian
    version. Now i want to download indian firmware in my phone. I have
    tried “DDLPA ” but its not getting install, may be due to lack of .PIT , PDA and CSC file. Can you advise me on same.

  75. Hi , I have installed in my galaxy s2 “XXLQ6” which is not indian
    version. Now i want to download indian firmware in my phone. I have
    tried “DDLPA ” but its not getting install, may be due to lack of .PIT , PDA and CSC file. Can you advise me on same.

  76. It works perfect! Thank you guys.

  77. It works perfect! Thank you guys.

  78. It works perfect! Thank you guys.

  79. please remove this post – many people hardbricked they phones
    – NOT SAFE – DON’T USE IT –

    1. very true. In my case ODIN says pass, but phone is not able to install the update. 🙁

  80. please remove this post – many people hardbricked they phones
    – NOT SAFE – DON’T USE IT –

    1. very true. In my case ODIN says pass, but phone is not able to install the update. 🙁

  81. please remove this post – many people hardbricked they phones
    – NOT SAFE – DON’T USE IT –

    1. very true. In my case ODIN says pass, but phone is not able to install the update. 🙁

  82. MY PHONE DONT OPEN PLS HELP ME WHAT I AM GOING TO DO WITH MY PHONE

  83. CATHERINE FROM PHILIPPINES

    MY PHONE DONT OPEN PLS HELP ME WHAT I AM GOING TO DO WITH MY PHONE

  84. CATHERINE FROM PHILIPPINES

    MY PHONE DONT OPEN PLS HELP ME WHAT I AM GOING TO DO WITH MY PHONE

  85. thanks bro i updated it very sucessfully update is awesome if anyone has quiers can contact me ill help u [email protected]

  86. thanks bro i updated it very sucessfully update is awesome if anyone has quiers can contact me ill help u [email protected]

  87. thanks bro i updated it very sucessfully update is awesome if anyone has quiers can contact me ill help u [email protected]

  88. can i use XXLQ5 in asia?

  89. can i use XXLQ5 in asia?

  90. can i use XXLQ5 in asia?

  91. do NOT! i repeat DO NOT DOWNLOAD AND USE THIS FIRMWARE!!! i can potentially brick ur phone and you will osse video and cam ability leaving searching the internet for endless hours figuring out a solution!! STAY AWAY!! DO NOT FLASH 4.0.4 even with the xxlq5 or qqlq6 or 7. they will all make u reflash back to stock.

    1. i think my phone working well after im flash with 4.0.4.. hiihihi

  92. do NOT! i repeat DO NOT DOWNLOAD AND USE THIS FIRMWARE!!! i can potentially brick ur phone and you will osse video and cam ability leaving searching the internet for endless hours figuring out a solution!! STAY AWAY!! DO NOT FLASH 4.0.4 even with the xxlq5 or qqlq6 or 7. they will all make u reflash back to stock.

    1. i think my phone working well after im flash with 4.0.4.. hiihihi

  93. do NOT! i repeat DO NOT DOWNLOAD AND USE THIS FIRMWARE!!! i can potentially brick ur phone and you will osse video and cam ability leaving searching the internet for endless hours figuring out a solution!! STAY AWAY!! DO NOT FLASH 4.0.4 even with the xxlq5 or qqlq6 or 7. they will all make u reflash back to stock.

    1. i think my phone working well after im flash with 4.0.4.. hiihihi

  94. It seems to me that upgrading to android 4.0.4 is not a good choice. Just wasted my internet quoter!!

  95. It seems to me that upgrading to android 4.0.4 is not a good choice. Just wasted my internet quoter!!

  96. It seems to me that upgrading to android 4.0.4 is not a good choice. Just wasted my internet quoter!!

  97. Why does mine keeps on failing?? I keep getting the red fail sign. It does not continue. PLEASE HELP

  98. Why does mine keeps on failing?? I keep getting the red fail sign. It does not continue. PLEASE HELP

  99. Why does mine keeps on failing?? I keep getting the red fail sign. It does not continue. PLEASE HELP

  100. i rooted my phone yesterday but on boot screen it freezes what can i do i did recovery and factory reset but still phone don’t wanna turn on…help somebody?

  101. i rooted my phone yesterday but on boot screen it freezes what can i do i did recovery and factory reset but still phone don’t wanna turn on…help somebody?

  102. i rooted my phone yesterday but on boot screen it freezes what can i do i did recovery and factory reset but still phone don’t wanna turn on…help somebody?

  103. My S2’s Camera screen doesn’t show up but it can take pictures…. Help please

  104. My S2’s Camera screen doesn’t show up but it can take pictures…. Help please

  105. My S2’s Camera screen doesn’t show up but it can take pictures…. Help please

  106. 4.0.3 had severe connectivity issues with WLAN and GPRS – almost unusable.
    I updated yesterday to 4.0.4 and after reboot it worked right away. I got my S2 back again.
    (BTW: Don’t forget to save your settings before you update , Kies & myBackup will do this Job for you)
    Many thanks to all the busy folks on this page that made this information available.

    Greets
    Ullrich

  107. 4.0.3 had severe connectivity issues with WLAN and GPRS – almost unusable.
    I updated yesterday to 4.0.4 and after reboot it worked right away. I got my S2 back again.
    (BTW: Don’t forget to save your settings before you update , Kies & myBackup will do this Job for you)
    Many thanks to all the busy folks on this page that made this information available.

    Greets
    Ullrich

  108. 4.0.3 had severe connectivity issues with WLAN and GPRS – almost unusable.
    I updated yesterday to 4.0.4 and after reboot it worked right away. I got my S2 back again.
    (BTW: Don’t forget to save your settings before you update , Kies & myBackup will do this Job for you)
    Many thanks to all the busy folks on this page that made this information available.

    Greets
    Ullrich

  109. owesome Hit by Any SAMSUNG GALAXY S2 Version International.it is installed successfully on all carrier mobiles without any bugs.

  110. owesome Hit by Any SAMSUNG GALAXY S2 Version International.it is installed successfully on all carrier mobiles without any bugs.

  111. owesome Hit by Any SAMSUNG GALAXY S2 Version International.it is installed successfully on all carrier mobiles without any bugs.

  112. Hello, I am grateful for the upgrade. Nd so faces a serious problem with the lack of Greek keyboard. Absent by choice. There ceases to him, and download applications thinking in this way will overcome the problem. Not not not succeed. Please help

  113. ICS Android 4.0.4 Update for Samsung Galaxy S2 International Version i9100

  114. Hello, I am grateful for the upgrade. Nd so faces a serious problem with the lack of Greek keyboard. Absent by choice. There ceases to him, and download applications thinking in this way will overcome the problem. Not not not succeed. Please help

  115. Hello, I am grateful for the upgrade. Nd so faces a serious problem with the lack of Greek keyboard. Absent by choice. There ceases to him, and download applications thinking in this way will overcome the problem. Not not not succeed. Please help

  116. ICS Android 4.0.4 Update for Samsung Galaxy S2 International Version i9100

  117. ICS Android 4.0.4 Update for Samsung Galaxy S2 International Version i9100

  118. thanks so much for the steps my phone worked just fine.

  119. thanks so much for the steps my phone worked just fine.

  120. thanks so much for the steps my phone worked just fine.

  121. Thank you very much, I was scared to do it but It worked perfectly fine(camera and everything) and the update is more stable than 4.0.3 (screenLock does not take too long to appear).

  122. Thank you very much, I was scared to do it but It worked perfectly fine(camera and everything) and the update is more stable than 4.0.3 (screenLock does not take too long to appear).

  123. Thank you very much, I was scared to do it but It worked perfectly fine(camera and everything) and the update is more stable than 4.0.3 (screenLock does not take too long to appear).

  124. Thank you very much, I was scared to do it but It worked perfectly fine(camera and everything) and the update is more stable than 4.0.3 (screenLock does not take too long to appear).

  125. I tried updating the firmware 4.0.4 on my Samsung Galaxy S2 as described above… it is showing FAILED with red background on the top left box… what could be the problem? My country is India and purchased the handset in India…

    1. Dude Ravi, lookie here – http://nerdschalk.com/tag/i9100G/ Awesome stuff awaits for you there, links to several jelly bean firmwares with full guides on how to get it . And, don’t try the above one. You will brick your device if you do the above.

    2. Dude Ravi, lookie here – https://nerdschalk.com/tag/i9100G/ Awesome stuff awaits for you there, links to several jelly bean firmwares with full guides on how to get it . And, don’t try the above one. You will brick your device if you do the above.

    3. dude!turn all kies drivers off, and enable usb debugging

  126. Ravi This firmware and the guide below are compatible only and only with Galaxy S2, model number I9100. It’s not compatible with the I9100G. You have the G

  127. I tried updating the firmware 4.0.4 on my Samsung Galaxy S2 as described above… it is showing FAILED with red background on the top left box… what could be the problem? My country is India and purchased the handset in India…

  128. I tried updating the firmware 4.0.4 on my Samsung Galaxy S2 as described above… it is showing FAILED with red background on the top left box… what could be the problem? My country is India and purchased the handset in India…

  129. I tried updating the firmware 4.0.4 on my Samsung Galaxy S2 as described above… it is showing FAILED with red background on the top left box… what could be the problem? My country is India and purchased the handset in India…

  130. I tried updating the firmware 4.0.4 on my Samsung Galaxy S2 as described above… it is showing FAILED with red background on the top left box… what could be the problem? My country is India and purchased the handset in India…

    1. Dude Ravi, lookie here – https://nerdschalk.com/tag/i9100G/ Awesome stuff awaits for you there, links to several jelly bean firmwares with full guides on how to get it . And, don’t try the above one. You will brick your device if you do the above.

    2. dude!turn all kies drivers off, and enable usb debugging

  131. I tried updating the firmware 4.0.4 on my Samsung Galaxy S2 as described above… it is showing FAILED with red background on the top left box… what could be the problem? My country is India and purchased the handset in India…

    1. Dude Ravi, lookie here – http://nerdschalk.com/tag/i9100G/ Awesome stuff awaits for you there, links to several jelly bean firmwares with full guides on how to get it . And, don’t try the above one. You will brick your device if you do the above.

    2. dude!turn all kies drivers off, and enable usb debugging

  132. Ravi This firmware and the guide below are compatible only and only with Galaxy S2, model number I9100. It’s not compatible with the I9100G. You have the G

  133. Ravi This firmware and the guide below are compatible only and only with Galaxy S2, model number I9100. It’s not compatible with the I9100G. You have the G

  134. Update went great. Everything’s working fine.

  135. Update went great. Everything’s working fine.

  136. Update went great. Everything’s working fine.

  137. I have a sgs2 flashed to cricket… Will it have to beflashed again… [email protected].. Thanks

  138. I have a sgs2 flashed to cricket… Will it have to beflashed again… [email protected].. Thanks

  139. I have a sgs2 flashed to cricket… Will it have to beflashed again… [email protected].. Thanks

  140. I have a sgs2 flashed to cricket… Will it have to beflashed again… [email protected].. Thanks

  141. I have a sgs2 flashed to cricket… Will it have to beflashed again… [email protected].. Thanks

  142. Thanks buddy. i was facing problem with sensor before update. its working perfectly after update 🙂

  143. Thanks buddy. i was facing problem with sensor before update. its working perfectly after update 🙂

  144. Thanks buddy. i was facing problem with sensor before update. its working perfectly after update 🙂

  145. can i use this method to upgrade my s2 from gingerbread to ics?

  146. can i use this method to upgrade my s2 from gingerbread to ics?

  147. can i use this method to upgrade my s2 from gingerbread to ics?

  148. i dont get the added message. what should i do?

  149. hi, my installation stops at 90% where it is installing Hidden.img, i’ve repeated the step a few times but to no avial. any help please?

  150. i dont get the added message. what should i do?

  151. i dont get the added message. what should i do?

  152. hi, my installation stops at 90% where it is installing Hidden.img, i’ve repeated the step a few times but to no avial. any help please?

  153. hi, my installation stops at 90% where it is installing Hidden.img, i’ve repeated the step a few times but to no avial. any help please?

  154. Great guide!
    should it really take so long for the phone to start after installing?

  155. HI, could you help me…..i’m always getting this message…look the picture below

    1. dude turn all kies drivers off, and enable usb debugging.

  156. Great guide!
    should it really take so long for the phone to start after installing?

  157. Great guide!
    should it really take so long for the phone to start after installing?

  158. HI, could you help me…..i’m always getting this message…look the picture below

    1. dude turn all kies drivers off, and enable usb debugging.

  159. HI, could you help me…..i’m always getting this message…look the picture below

    1. dude turn all kies drivers off, and enable usb debugging.

  160. thanks its working 5n thanks a lot

  161. thanks its working 5n thanks a lot

  162. thanks its working 5n thanks a lot

  163. i cannot extract file RAR.. this file need a password!!

  164. i cannot extract file RAR.. this file need a password!!

  165. i cannot extract file RAR.. this file need a password!!

  166. i have done upgrading but my call voice not goiung n coming plzz tell me about this issue

  167. i have done upgrading but my call voice not goiung n coming plzz tell me about this issue

  168. i have done upgrading but my call voice not goiung n coming plzz tell me about this issue

  169. it’s working perfectly
    many thanks dear

  170. it’s working perfectly
    many thanks dear

  171. it’s working perfectly
    many thanks dear

  172. here you get ICS 4.0.4 XXLQ6 stock rom for s2 with steps to install

    http://www.adityandroid.com/2012/10/update-galaxy-s2-i9100-to-android-404.html

  173. here you get ICS 4.0.4 XXLQ6 stock rom for s2 with steps to install

    http://www.adityandroid.com/2012/10/update-galaxy-s2-i9100-to-android-404.html

  174. here you get ICS 4.0.4 XXLQ6 stock rom for s2 with steps to install

    http://www.adityandroid.com/2012/10/update-galaxy-s2-i9100-to-android-404.html

  175. I just installed the ICS 4.0.4 on my S2 and it seems to run fine. Internet is much faster, google map is much more refined. Looks good, so far. I used the European version, therefore there is no Indonesian language. But that is OK, used English most of the time. Great job and thanks. Will let you know if it saves battery.

  176. I just installed the ICS 4.0.4 on my S2 and it seems to run fine. Internet is much faster, google map is much more refined. Looks good, so far. I used the European version, therefore there is no Indonesian language. But that is OK, used English most of the time. Great job and thanks. Will let you know if it saves battery.

  177. I just installed the ICS 4.0.4 on my S2 and it seems to run fine. Internet is much faster, google map is much more refined. Looks good, so far. I used the European version, therefore there is no Indonesian language. But that is OK, used English most of the time. Great job and thanks. Will let you know if it saves battery.

  178. I did everything just as it says,
    But everything keeps crashing
    What to do?!

  179. I did everything just as it says,
    But everything keeps crashing
    What to do?!

  180. I did everything just as it says,
    But everything keeps crashing
    What to do?!

Comments are closed.