Galaxy S3 Jelly Bean Update: I9300XXDLI8 [Android 4.1]

Here’s a nice Sunday treat for Galaxy S3 owners, though most probably will be irritated more than be happy, as another official Android 4.1 Jelly Bean OTA update has leaked for the Galaxy S3, this time with firmware version XXDLI8, continuing the saga of leaked updates for the device as we wait for the Jelly Bean update to be officially released (which is slated for October).

“If you have the T-Mobile Galaxy S3, you can try out its leaked Jelly Bean firmware → here. Bell Galaxy S3 (i747M) owners can try out the leaked Jelly Bean update → here. Galaxy Tab 2 10.1 Jelly Bean leak can be found → here, while Galaxy Tab 2 7.0 leak can be found → here.”

Like always, we have a guide ready that will help you flash the latest Jelly Bean update on your Galaxy S3, with step-by-step instructions. You will need to have a microSD card inserted into the phone to be able to update.

Keep in mind that this is a leaked pre-release firmware and has not yet been officially released by Samsung and hence could have some issues, so you should wait for the official update to come out if you’re not comfortable with manual flashing. But if still try it out, you can always flash back to an Android 4.0 firmware later if needed, which will enable you to get official updates from Samsung again.

Let’s take a look at how you can install XXDLI8 Jelly Bean Android 4.1 update on the Galaxy S3.

Compatibility

This guide to install Android 4.1 Jelly Bean firmware is compatible only and only with the international Galaxy S3, model number i9300It’s not compatible with the US variants or any other device. Check your device’s model number in: Settings » About phone.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.

How to Install XXDLI8 Jelly Bean Update on Galaxy S3

  1. [Important!] You might need to wipe data during this procedure. So makes sure to backup your apps and important data — bookmarks, contacts, SMS, APNs (internet settings), etc. This Android backup guide would help you. Backup all the SD card files, including camera photos, music, etc as well as those also might get erased during the flash as this is a leaked firmware
  2. [Important!] Flash the stock XXBLG8 firmware on your phone by following the guide → here. The update will fail to flash on any other firmware or on custom ROMs, as it needs the phone to be on the XXBLG8 firmware. Keep in mind that this may require you to wipe data on your phone, so be sure to make a backup (see step 1).
  3. Download the Jelly Bean OTA update file.
    Download XXDLI8 OTA  |  Alternate Link
    Filename: GT-I9300_I9300XXDLI8-OTA-I9300XXBLG8_BTU_297718496.zip  |  Size: 283 MB
  4. Copy the GT-I9300_I9300XXDLI8-OTA-I9300XXBLG8_BTU_297718496.zip file to the external storage i.e the microSD card on your phone.
  5. Turn off the phone. Then, boot into stock recovery. To do so, hold down Volume Up, Home and then the Power buttons together until the screen turns on, then let them go. The phone will boot into recovery in a few seconds.
    In recovery, use the volume buttons to scroll up/down and the home button to select an option.
  6. Select apply update from external storage, then scroll to and select the GT-I9300_I9300XXDLI8-OTA-I9300XXBLG8_BTU_297718496.zip file to start installation of the Jelly Bean OTA update.
  7. After installation is complete, the phone should reboot automatically. If it does not reboot, go back to the main recovery menu and select reboot system now to boot up into the newly installed Android 4.1.1 Jelly Bean firmware.

The latest leaked Jelly Bean OTA update is now installed on your Galaxy S3. Do let us know how it works for you and the things you notice in the firmware (like bugs, improvements or new features).

If you wish to, you can also try out few custom Jelly Bean ROMs for the Galaxy S3 → here.

18 Comments

  1. something is wrong with this update. E:Error in /…. Status 7

    1. Are you installing it over stock XXBLG8 firmware?

      1. no, over LI7

        1. You have to install xxblg8 firmware first linked above.

    2. you should install stock xxblg8 and then update with device update. then try the xxdli8 update, had the same problem

      1. but you have to reinstall all?

  2. I have the same problem as Robert, do you have any suggestion?

    1. You have to install xxblg8 firmware first linked above.

  3. if I’ve already got XXDLI5 on my S3 do i have to put XXBLG8 on phone before trying to install XXDLI8

    1. Yes, most probably, you can try it directly. Won’t hurt. But if this doesn’t work, install XXBLG8, and then XXDLI8 OTA update via recovery, as said above.

  4. i’ve tried this update after installing XXBLG8, still showing error, any solution please

  5. i installed XXBLG8 First, but still getting error E: …

  6. Genera error en el teclado y se bloquea

  7. im already on xxblg8 then trying to update to xxdli8.. keep getting error status 7.. what supposed to be the problem? ive followed everything.. pls help i really dont know what to do now..

  8. I run the this version since it came.out and it seems flowles and battery life is amazing.made more than 30 hours with one charge and I use my.s3 a lot

Comments are closed.