[Download] Galaxy Note 4 Canada (SM-N910W8) Android 5.1.1 update [and Root info]

The Canadian users of Samsung Galaxy Note 4 are in for a treat today. A new software update is heading their way, carrying the Android 5.1.1 upgrade, with build no. N910W8VLU1COI4.

It’s been a long wait as regards Android 5.1.1 update for Canadian Note 4 users, but after the global Note 4 sets with model no. N910C and N910F bagging their 5.1.1, other global variant SM-N910G received the 5.1.1 update today, now followed by the Note 4 sets in Canada (N910W8).

What else the OI4 update brings isn’t known yet, but it’s worth wagering that it packs in a Stagefright fixer patch too.

If you haven’t received the OTA update notification yet, then hit up Settings > About device, and then check for a system update manually (better use WiFi connection).

Do feedback us on Android 5.1.1 update once you installed it and spent some time with it. We’d love to hear your opinion and Samsung’s doing about the update.

Downloads

  • Telus Canada Galaxy Note 4 Android 5.1.1 update — Link | File: TLS-N910W8VLU1COI4-20151002161810.zip (1.76 GB)
  • Odin PC software — Link | File: Odin3_v3.10.6.zip (1.6 MB)

Supported devices

  • CANADA GALAXY NOTE 4, model no. SM-N910W8
  • Don’t try this on any other device whose model no. is not as given above!

Disclaimer

Installing an official firmware through Odin doesn’t void your device’s warranty, but it remains an unofficial process and thus you need to be cautious of it. In any case, you only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Backup!

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files. Sometimes, Odin installation may delete everything on your device!

Step-by-step Guide

Step 1. Download the Odin software and firmware file from above.

Step 2. Install Samsung Galaxy Note 4 (use method 1 there!) first of all. Double click the .exe file of drivers to begin installation. (Not required if you have already done this.)

Step 3. Extract the firmware file now. You can use a free software like 7-zip for this. Install 7-zip, then right click on firmware file and under 7-zip, select ‘Extract here’. You should get the a file in .tar.md5 format now. We will be loading this file into Odin, to be installed on device (in step 9 below)

Step 4. Extract the Odin file. You should get this file, Odin3 v3.10.6.exe (other files could be hidden, hence not visible).

Step 5. Disconnect your Galaxy Note 4 from PC if it is connected.

Step 6. Boot Galaxy Note 4 into download mode:

  • Power off your Galaxy Note 4. Wait 6-7 seconds after screen goes off.
  • Press and hold the three buttons Volume down + Power + Home together until you see warning screen.
  • Press Volume Up to continue to download mode.

Step 7. Double click on extracted file of Odin, Odin3 v3.10.6.exe, to open the Odin window as shown below. Be careful with Odin, and do just as said to prevent problems.

Odin 3.10.6

Step 8. Connect your Galaxy Note 4 now using USB cable. Odin should recognize your device. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.

  • You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
  • If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with device. Mostly, drivers are the problem (look at step 2 above).
  • You can try different USB ports on your PC too.

Odin 3.10.6 Added message

Step 9. Load the firmware file into Odin. Click the AP button on Odin and the select the .tar.md5 file from Step 3 above.

  • Info: When you load files, Odin checks the md5 of firmware file, which takes time. So, simply wait until that’s done and the firmware file is loaded. Don’t worry if Odin gets unresponsive for a while, it’s normal. Binary size will also show up in Odin.

Odin 3.10.6 Firmware loaded after md5 check

Step 10. Make sure Re-partition check box is NOT selected, under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step.

Re-partition Remains Off

Step 11. Click the Start button on Odin now to start flashing the firmware on your Galaxy Note 4.Wait till installation is finished, after which your device will reboot automatically. You’ll get PASS message as shown below upon successful installation from Odin.

  • If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the file and flash it again as said above.
  • If you get FAIL in the top left box, then also you need to flash the file again as stated just above.

Odin 3.10.6 Pass Message Appears

Step 12. First start of the device may take time, so wait patiently again. Check the Settings > About phone to confirm new firmware.

That’s it.

Enjoy your Galaxy Note 4 on Android 5.1.1 update, here’s hoping performance of the device is improved as well.

Need help? Sure let us know via comments below.

Root Android 5.1.1 update (N910W8)

Well, you have got to wait for the time being. We’re sure a developer or two will bring out necessary kernel with permissive privileges soon enough, maybe in a day or two.

Once we have a custom kernel supporting root access, we shall be able to root Galaxy Note 4 (N910W8).

  • SM-N910W8 Galaxy Note 4 Android 5.1.1 Root (no links provided until root becomes available)

Via

Posted by
Kapil Malani

A die-hard Liverpool FC fan, Kapil is a big fan of Batman, Android and street Cricket. In that order, probably. Email: [email protected]

14 Comments

  1. The title, the file and most of the article reference the N910W8 which is correct in regards to Canadian Note 4 but under “Supported Devices” you put N910G. I assume that is a typo considering the file name does say N910W8 but am still curious about that.

    1. Hey Mr K, at nope(3), yes, that was a mistake, now corrected, thanks to you.

    2. Awesome, good to know it’s the right firmware for my device. I figured it was since highly unlikely the firmware has the typo lol but better safe than sorry with an expensive device.

  2. The title, the file and most of the article reference the N910W8 which is correct in regards to Canadian Note 4 but under “Supported Devices” you put N910G. I assume that is a typo considering the file name does say N910W8 but am still curious about that.

    1. Hey Mr K, at nope(3), yes, that was a mistake, now corrected, thanks to you.

      1. Awesome, good to know it’s the right firmware for my device. I figured it was since highly unlikely the firmware has the typo lol but better safe than sorry with an expensive device.

  3. You sure this is the Telus ROM? It installed some stock Bell apps for me.

  4. You sure this is the Telus ROM? It installed some stock Bell apps for me.

  5. Is there a custom Kernel yet?

  6. Is there a custom Kernel yet?

  7. so as of rite now there is no way to root a Samsung galaxy note four? cause when I go to their website on sammobile.com and they ask you to purchase a root server for this device. so it is out there. or maybe it is a hoax. I just had to download the original firmware because I rooted wrong and was stuck in boot loop. like an amature I did not back up my phone. so its like having a brand new phone. lol lost all contacts etc. but that’s my own issue but is there a cf auto root for this Samsung. sm-n910w8 5.1.1 TELUS

    1. if you know of a cf auto root for Samsung that I could use with odin. please let me know 🙂

  8. so as of rite now there is no way to root a Samsung galaxy note four? cause when I go to their website on sammobile.com and they ask you to purchase a root server for this device. so it is out there. or maybe it is a hoax. I just had to download the original firmware because I rooted wrong and was stuck in boot loop. like an amature I did not back up my phone. so its like having a brand new phone. lol lost all contacts etc. but that’s my own issue but is there a cf auto root for this Samsung. sm-n910w8 5.1.1 TELUS

    1. if you know of a cf auto root for Samsung that I could use with odin. please let me know 🙂

Comments are closed.