Install ClockworkMod (CWM) Recovery On Micromax Canvas A1 [One Click Installer]

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  GUIDE: INSTALL CLOCKWORKMOD RECOVERY ON MICROMAX CANVAS A1

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings.Another way to confirm model no. is by looking for it on the packaging box of your device. It must be CANVAS A1!

Please know that this page is meant only for Canvas A1. Please DO NOT try the procedures given here on any other Micromax devices. You’ve been Warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

 ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash CWM Recovery on your Canvas A1. If you are not sure, follow the link below for a guide to install driver for your Canvas A1 on your computer.

 MICROMAX CANVAS A1 DRIVERS FOR WINDOWS

 STEP 3: UNLOCK BOOTLOADER

 Skip this step if your device is already bootloader unlocked.

User must first unlock the bootloader on your Canvas A1 before proceeding with the guide below.

If you are not sure on how to unlock bootloader, here is our definitive guide on how to unlock bootloader of Canvas A1.

 UNLOCK BOOTLOADER OF CANVAS A1

   STEP 4: INSTALLATION INSTRUCTIONS

  DOWNLOADS

Download the file given below and transfer it to a separate folder on your phone and remember the location.

  RECOVERY FILE

DOWNLOAD LINK | File name: recovery.img (5.9 MB)

ONE CLICK RECOVERY INSTALLER

DOWNLOAD LINK  |  File name: one-click-recovery-installer.zip (920 KB)

  STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing the kernel file, which might delete internal sd card too, your files will remain safe on PC.

  1. Prepare your phone:
    • Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.
    • Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” check-box (under Debugging section).
  2. Connect your phone to PC with a USB cable and if a pop-up screen shows up on phone asking you to Allow USB debugging for the computer, make sure you tick the checkbox and tap OK.Authorize-computer-for-USB-Debugging
  3. Extract the installer file one-click-recovery-installer.zip (using 7-zip free software, preferably). You’ll get the following files:
    • one-click-recovery-installer.bat
    • adb.exe
    • adb-linux
    • adb-mac
    • AdbWinApi.dll
    • AdbWinUsbApi.dll
    • fastboot.exe
    • fastboot-linux
    • fastboot-mac
      └ The only file that matters for you is one-click-recovery-installer.bat, you can ignore others (but DON’T delete any).
  4. [!Important] Make sure that the recovery file is with the name recovery.img.
  5. Paste the recovery.img file to the folder where you extracted the files in the Step 3.
    └ Both the one-click-recovery-installer.bat file and recovery.img file should be in the same folder along with all the other files we got in Step 3.
  6. Double-click/Run the one-click-recovery-installer.bat’ file and follow the simple on-screen instructions like ‘Press any key to continue..’ to install CWM recovery on your Canvas A1.
    └ Note: In case the script gets stuck on < waiting for device > (see image below) for more than a minute or so, then it means you don’t have proper drivers installed on your computer for your Canvas A1. Follow the drivers installation guide provided above for troubleshooting driver and other connectivity issues.
    Device-not-found-waiting-for-device
  7. Once the CWM recovery is flashed successfully, your device will automatically reboot into system.

That’s it, CWM is installed on your Canvas A1.

FEEDBACK US!

It was easy to install CWM recovery on your Canvas A1 , right? Let us know how you plan to use the recovery on your Canvas A1.

Your suggestions and queries, if any, are most welcomed!

6 Comments

  1. hey its not working for my device canvas a1(marshmallow)…i followed everything but again i normal recovery mode(factory one)…..

  2. hey its not working for my device canvas a1(marshmallow)…i followed everything but again i normal recovery mode(factory one)…..

  3. Hi have you unlocked bootloader.

  4. Hi have you unlocked bootloader.

  5. thaks a lot buddy .. i got my dead cellphone back.

  6. thaks a lot buddy .. i got my dead cellphone back.

Comments are closed.